farmall super a
 | 1947 - 1954 | 1947 - 1954 |
|---|---|---|
1947 - 1954 | ||
1947 - 1954 |
|---|
Production | |
|---|---|
Manufacturer | Farmall (a part of International Harvester) |
Factories | Louisville, Kentucky, USA |
| Chicago, Illinois, USA |
Total built | 107,636 |
Original price | $1,400 (1954) |
The IH/Farmall Super A was an improved version of the A. The biggest change was that the previous Lift-All system was replaced with the new Touch Control hydraulic system. This was in response to the Ferguson three-point system used by Ford. | |
Variants | |
|---|---|
Super AV | high-clearance, vegetable |
Farmall Super A Engines | |
|---|---|
International Harvester 1.9L 4-cyl gasoline | |
International Harvester 1.9L 4-cyl kerosene | |
Engine details ...  |
Farmall Super A Transmission | |
|---|---|
4-speed sliding gear | |
Transmission details ...  |
Farmall Super A Power | |
|---|---|
Drawbar (claimed) | 13 hp
9.7 kW |
PTO (claimed) | 16 hp
11.9 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Differential mechanical contracting band brakes | |
Open operator station. | |
Photos | |
|---|---|
 | |
Farmall Super A photos...  |
Capacity | |
|---|---|
Fuel | 11 gal
41.6 L |
Aux. fuel | 0.75 gal
2.8 L |
Hydraulic system | 2.1 gal
7.9 L |
Rear hubs | 3 qts (each)
2.8 L |
Hydraulics | |
|---|---|
Type | IH Touch-Control |
Capacity | 2.1 gal
7.9 L |
Valves | 1 |
Tractor hitch | |
|---|---|
Type | mid-mount Touch Control rockshaft |
Power Take-off (PTO) | |
|---|---|
Rear PTO | transmission |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 71.1 inches
180 cm |
Weight | 2,400 lbs
1088 kg |
Front tire | 5.00-15 |
Rear tire | 9-24 |
Full dimensions and tires ...  | |
Farmall Super A attachments | |
|---|---|
front-end loader | |
Attachment details ...  |
Super A Serial Number Location | |
|---|---|
 | |
On the right side of the seat support |
Super A Serial Numbers | |
|---|---|
1947 | 250001 |
1948 | 250082 |
1949 | 268196 |
1950 | 281269 |
1951 | 300126 |
1952 | 324470 |
1953 | 336880 |
1954 | 353348 |
FAQ: How to read a serial number table. | |
Belt Pulley | |
|---|---|
Diameter | 8.5 inches
21 cm |
Width | 6 inches
15 cm |
RPM | 1157 |
Speed | 2574 ft/min
784.56 meters/min |
Electrical | |
|---|---|
Ground | postitive |
Battery volts | 6 |
References | |
|---|---|
 | |
Farmall Letter Series Tractors by Lee Klancher | |
Farm Loaders published in 1962, by International Harvester | |
Farm Loaders published in 1970, by International Harvester | |
Operator's Manual Farmall Super A and Super AV (1004193R5) published in 1953 | |
Vegetable Truck Farming published by International Harvester | |
General Line Catalog published in 1949, by International Harvester |
Recommended Products
Advertisement · Featured Tractor-Related Products
AM116304: Inline Fuel Filter
for Kohler 25 050 22-S, 25 050 03-S ,25 050 08-S Fits 1/4-inch and 5/16-inch ID Fuel Line. for John Deere AM116304 AM1163041 GY20709 for Small Engine GKI VW312 6mm-8mm 1/4 Plastic Inline Gas/Fuel Filter G1000 G4164
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
Tractor Taillight Lens Amber
"Color and material" This lens adopts amber design, which is not only beautiful and elegant, but also can effectively improve the visibility of driving at night and reduce the glare to other drivers. The amber design can also provide the driver with a wider field of vision, making you feel safer when driving.
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
* This page contains affiliate links, purchases may generate revenue for this site