Farmtrac 795DTC
The Farmtrac 795DTC is a tractor produced by Farmtrac. It is equipped with a 244 ci 4.0 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: shuttle. Operating weight: 7,490 lbs 3397 kg.
Engine Power
Diesel (listed): 95 hp / 70.8 kW
Fuel & Capacities
21.2 gal
80.2 L
Transmission
shuttle
Operating Weight
7,490 lbs
3397 kg
Overview
 | 2006 - 2008
7 SeriesFarm/Agricultural tractorSAME built
7 Series
Farm/Agricultural tractor
SAME built |
|---|
Production | |
|---|---|
Distributor | Farmtrac |
Manufacturer | SAME |
Farm/Agricultural tractor | |
Built in Italy | |
Farmtrac 795DTC Engine | |
|---|---|
Deutz-Fahr 4.0L 4-cyl diesel | |
Fuel tank | 21.2 gal
80.2 L |
Engine details ...  | |
Farmtrac 795DTC Transmission | |
|---|---|
15-speed | |
Transmission details ...  |
Farmtrac 795DTC Power | |
|---|---|
Engine | 95 hp
70.8 kW |
PTO (claimed) | 84 hp
62.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
ROPS | |
Hydraulics | |
|---|---|
Valves | 2 |
Pump flow | 14.3 gpm
54.1 lpm |
Total flow | 21.8 gpm
82.5 lpm |
Steering flow | 7.5 gpm
28.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at ends) | 6,829 lbs
3097 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Weight | 7,490 lbs
3397 kg |
Front tire | 13.6x24 |
Rear tire | 18.4x30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 65 |
Battery CCA | 800 |
Battery volts | 12 |
Engine
Engine Detail — 244 ci / 4.0 L Diesel
Manufacturer | Deutz-Fahr |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 244 ci
4.0 L |
Power | 95 hp
70.8 kW |
Air cleaner | dry |
Starter volts | 12 |
Transmission
Transmission — shuttle
Transmission | shuttle |
Gears | 15 forward and reverse |
Dimensions
Farmtrac 795DTC Tires | |
|---|---|
Ag front | 13.6x24 |
Ag rear | 18.4x30 |
Ag front | 12.4x24 |
14.9x24 | |
Ag rear | 16.9x30 |
16.9x34 | |
Dimensions | |
|---|---|
Length | 158 inches
401 cm |
Width | 82 inches
208 cm |
Height | 93 inches
236 cm |
Operating weight | 7,490 lbs
3397 kg |
Photos
Farmtrac 795DTC tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Farmtrac 795DTC based on its 95 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Farmtrac 795DTC.
Estimated Continuous Field Runtime: 4.3 hrs
Approximately 4.3 hours of continuous field operation at ~75% rated power on a full tank (21.2 gal / 80.3 L).
Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Farmtrac 795DTC Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Farmtrac 795DTC.
Converted Equivalents:
Horsepower (HP)95 hp
Kilowatts (kW)70.8 kW
Metric Horsepower (PS / CV)96.3 PS
Direct Competitor Comparison
Compare Farmtrac 795DTC against same-era industry alternatives in the same horsepower class.
Current Model
Farmtrac
Farmtrac 795DTC
Engine Power:Diesel (listed): 95 hp / 70.8 kW
★ Baseline Reference
Related models
Farmtrac 785DTC
- Power:
- 85
- Production years:
- 2006 - 2008
Farmtrac 7115DTC
- Power:
- 114
- Production years:
- 2006 - 2008
Farmtrac 8060
- Power:
- 60
- Production years:
- 2007 - 2017
Farmtrac 8075
- Power:
- 72.4
- Production years:
- 2007 - 2008
Farmtrac 435
- Power:
- 35
- Production years:
- 2006 - 2008