Massey Ferguson 3308

The Massey Ferguson 3308 is a tractor produced by Massey Ferguson. It is equipped with a 201 ci 3.3 L engine. The listed engine power is Diesel (listed): 86 hp / 64.1 kW. Transmission: 18 forward and 4 reverse. Operating weight: 6074 to 6715 pounds.

Engine Power

Diesel (listed): 86 hp / 64.1 kW

Fuel & Capacities

22.5 gal 85.2 L

Transmission

18 forward and 4 reverse

Operating Weight

6074 to 6715 pounds

Overview

	2021 - 3300 SeriesOrchard/Vineyard tractor
2021 -
3300 Series
Orchard/Vineyard tractor

Production
Manufacturer	Massey Ferguson
Orchard/Vineyard tractor

Massey Ferguson 3308 Engine
AGCO Power 3.3L 3-cyl diesel
Fuel tank	22.5 gal 85.2 L
Engine details ...

Massey Ferguson 3308 Power
Engine	86 hp 64.1 kW

Mechanical
Two- or four-wheel drive
Power steering
Two-post mid-mount folding ROPS. Cab optional with air-conditioning.

Hydraulics
Pressure	2611 psi 180.0 bar
Pump flow	8.2 gpm 31.0 lpm
	11.1 gpm 42.0 lpm
	15.6 gpm 59.0 lpm
Steering flow	8.2 gpm 31.0 lpm

Tractor hitch
Control	II/I
Rear lift	4630 lbs 2100 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical disc
Rear PTO Type	540 (1.375)
Engine RPM	540@1900

Dimensions & Tires
Wheelbase	90.6 inches 230 cm
Weight	6074 to 6715 pounds
Front tire	7.50-16
2WD Rear tire	16.9x24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MF 3300 published in 2019, by Massey Ferguson
MF 3300 published in 2021, by Massey Ferguson

Engine

Engine Detail — 201 ci / 3.3 L Diesel

Manufacturer	AGCO Power 33 CWIC3
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	201 ci 3.3 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Power	86 hp 64.1 kW
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed
18-speed creeper

Transmission — 12 forward and 4 reverse

Gears	12 forward and 4 reverse
Transmission
Type	creeper
Gears	18 forward and 4 reverse

Dimensions

Massey Ferguson 3308 Tires
2WD Standard tires (ag)	Front: 7.50-16. Rear: 16.9x24
4WD Standard tires (ag)	Front: 250/80-18. Rear: 16.9x24

Dimensions
Wheelbase	90.6 inches 230 cm
Length	148.2 inches 376 cm
Height (ROPS)	91.6 inches 232 cm
Height (Folded ROPS)	63.4 inches 161 cm
Height (cab)	92.8 inches 235 cm
Clearance (drawbar)	11.8 inches 29 cm

Massey Ferguson 3308 Weight
2WD ROPS	6074 lbs 2755 kg
4WD ROPS	6393 lbs 2899 kg
4WD Cab	6715 lbs 3045 kg

Photos

Massey Ferguson 3308 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 3308 based on its 86 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 3308.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (22.5 gal / 85.2 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (16.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours