Fendt Farmer 240S

The Fendt Farmer 240S is a tractor produced by Fendt. It is equipped with a 172.44 ci 2.8 L engine. The listed engine power is Diesel (listed): 40 hp / 29.8 kW. Transmission: 21 forward and 6 reverse. Operating weight: 5148 lbs 2335 kg.

Engine Power

Diesel (listed): 40 hp / 29.8 kW

Fuel & Capacities

15.9 gal 60.2 L

Transmission

21 forward and 6 reverse

Operating Weight

5148 lbs 2335 kg

Overview

	1987 - 1993 Farmer 200 SeriesRow-Crop tractor Farmer 200 Series Row-Crop tractor

Production
Manufacturer	Fendt
Row-Crop tractor

Fendt Farmer 240S Engine
KHD 2.8L 3-cyl diesel
Fuel tank	15.9 gal 60.2 L
Engine details ...

Fendt Farmer 240S Transmission
21-speed
Transmission details ...

Fendt Farmer 240S Power
Engine	40 hp 29.8 kW

Mechanical
Two-wheel drive
Power steering
Hydraulic drum brakes

Hydraulics
Pump flow	9.0 gpm 34.1 lpm

Tractor hitch
Rear lift	5402 lbs 2450 kg

Power Take-off (PTO)
Rear PTO Type	540, 750, 1000

Dimensions & Tires
Wheelbase	80.71 inches 205 cm
Weight	5148 lbs 2335 kg
Front tire	7.50-16
Rear tire	12.4R32
Full dimensions and tires ...

References

Innovations for 1988 published by Fendt

Engine

Engine Detail — 172.44 ci / 2.8 L Diesel

Manufacturer	KHD F3L912
Fuel Type	Diesel
Configuration	3-cylinder, air-cooled
Displacement	172.44 ci 2.8 L
Bore/Stroke	3.937x4.72 inches 100 x 120 mm
Power	40 hp 29.8 kW
Fuel system	direct injection
Rated RPM	2000
Torque	120.9 lb-ft 163.9 Nm
Torque RPM	1450
Starter	electric
Starter volts	12

Transmission

Transmission — 21 forward and 6 reverse

Gears	21 forward and 6 reverse
Gearshift with three gears (1-3), plus reverse (R), and three overdrive gears (25, 30, and 40 kph). Triple range gear split provides three speeds for each of the non-overdrive gears. Low and high ranges. Transmission also available with addition super-creeper range providing 30 gears forward and 9 reverse.

Dimensions

Fendt Farmer 240S Tires
Ag front	7.50-16
Ag rear	12.4R32

Dimensions
Wheelbase	80.71 inches 205 cm
Length	139.37 inches 353 cm
Height	90.16 inches 229 cm
Weight	5148 lbs 2335 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 240S based on its 40 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 240S.

Estimated Continuous Field Runtime: 7.6 hrs

Approximately 7.6 hours of continuous field operation at ~75% rated power on a full tank (15.9 gal / 60.2 L).

Estimated 75% Load Fuel Burn~2.1 gal/hr (7.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours