Fendt Farmer 312

The Fendt Farmer 312 is a tractor produced by Fendt. It is equipped with a 380.4 ci 6.2 L engine. The listed engine power is Diesel (listed): 125 hp / 93.2 kW. Transmission: 21 forward and reverse. Operating weight: 11796 lbs 5350 kg.

Engine Power
Diesel (listed): 125 hp / 93.2 kW
Fuel & Capacities
42.3 gal 160.1 L
Transmission
21 forward and reverse
Operating Weight
11796 lbs 5350 kg

Overview

Fendt Farmer 312 tractor photo
1993 - 2000 Farmer 300 SeriesRow-Crop tractor Farmer 300 Series Row-Crop tractor
Production
Manufacturer
Fendt
Row-Crop tractor
Fendt Farmer 312 Engine
MWM 6.2L 6-cyl diesel
Fuel tank
42.3 gal 160.1 L
Engine details ...
Fendt Farmer 312 Transmission
21-speed three-speed power shift
Transmission details ...
Fendt Farmer 312 Power
Engine
125 hp 93.2 kW
Mechanical
Four-wheel drive
Differential lock
electro-hydraulic front and rear
Power steering
Hydraulic disc brakes
Cab standard with air-conditioning.
Hydraulics
Pump flow
19.8 gpm 74.9 lpm
Tractor hitch
Rear lift
12819 lbs 5814 kg
Power Take-off (PTO)
Rear PTO
independent
Clutch
electro-hydraulic
Rear PTO Type
540/750/1000
Front PTO
independent OptOptional
Clutch
electro-hydraulic
Front PTO Type
1000
Dimensions & Tires
Wheelbase
101.9 inches 258 cm
Weight
11796 lbs 5350 kg
Front tire
420/70R28
Rear tire
520/70R38
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
95
Battery volts
12
Battery AH
135
References
Farmer 312 references literature
Farmer 307 - 308 - 309 - 310 - 311 - 312 published in 1993, by Fendt

Engine

Engine Detail — 380.4 ci / 6.2 L Diesel

Manufacturer
MWM TD226.B6
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
380.4 ci 6.2 L
Bore/Stroke
4.134x4.72 inches 105 x 120 mm
Power
125 hp 93.2 kW
Rated RPM
2400
Torque
354 lb-ft 480.0 Nm
Torque RPM
1500
Starter
electric
Starter volts
12

Transmission

Transmission — 21 forward and reverse three-speed power shift

Type
three-speed power shift
Gears
21 forward and reverse
Three gears, in two ranges, with a three-speed power shift. Additional three overdrive gear ranges. The 40 kph overdrive was not available in all markets.
Farmer 312  three-speed power shift speeds

Dimensions

Fendt Farmer 312 Tires
Standard tires (ag)
Front: 420/70R28. Rear: 520/70R38
Optional tires (ag)
Front: 16.9R26. Rear: 18.4R38
Front: 480/70R26. Rear: 520/70R38
Front: 480/65R38. Rear:
Front: 600/65R38. Rear:
Front: 9.5R36. Rear:
Front: 11.2R48. Rear:
Front: 12.4R32. Rear: 12.4R46
Dimensions
Wheelbase
101.9 inches 258 cm
Length
176.4 inches 448 cm
Width
91.3 inches 231 cm
Height (cab)
111 inches 281 cm
Weight
11796 lbs 5350 kg
Max weight
16535 lbs 7500 kg
Front tread
70.9 inches 180 cm
Rear tread
70.9 inches 180 cm

Photos

Fendt Farmer 312

Fendt Farmer 312

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 312 based on its 125 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 312.

Estimated Continuous Field Runtime: 6.5 hrs

Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (42.3 gal / 160.1 L).

Estimated 75% Load Fuel Burn~6.5 gal/hr (24.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Fendt Farmer 312 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Fendt Farmer 312.

Converted Equivalents:

Horsepower (HP)125 hp
Kilowatts (kW)93.2 kW
Metric Horsepower (PS / CV)126.7 PS

Direct Competitor Comparison

Compare Fendt Farmer 312 against same-era industry alternatives in the same horsepower class.

Current Model
Fendt

Fendt Farmer 312

Engine Power:Diesel (listed): 125 hp / 93.2 kW
★ Baseline Reference
Deutz-FahrMarket Competitor

Deutz-Fahr 6.17

Engine Power:113
Production Years:1991 - 1995
KubotaMarket Competitor

Kubota M5111

Engine Power:113
Production Years:2016 - 2020
CaseIHMarket Competitor

CaseIH CS 120

Engine Power:113.4
Production Years:1997 - 2003
DeereMarket Competitor

Deere 4530

Engine Power:114
Production Years:1975 - 1980