Fiat F140
The Fiat F140 is a tractor produced by Fiat. It is equipped with a 357.64 ci 5.9 L engine. The listed engine power is Diesel (listed): 140 hp / 104.4 kW. Transmission: Hi-Lo. Operating weight: 11686 lbs 5300 kg.
Engine Power
Diesel (listed): 140 hp / 104.4 kW
Fuel & Capacities
58.1 gal
219.9 L
Transmission
Hi-Lo
Operating Weight
11686 lbs
5300 kg
Overview
![]() | 1993 - 1996
Winner SeriesRow-Crop tractor
Winner Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Fiat |
Row-Crop tractor | |
Fiat F140 Engine | |
|---|---|
Iveco 5.9L 6-cyl diesel | |
Fuel tank | 58.1 gal
219.9 L |
Engine details ... | |
Fiat F140 Transmission | |
|---|---|
24-speed | |
Transmission details ... |
Fiat F140 Power | |
|---|---|
Engine | 140 hp
104.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydraulic power |
Wet disc brakes | |
Cab standard. Air-conditioning optional. | |
Hydraulics | |
|---|---|
Pump flow | 14.5 gpm
54.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | position control and lower-link draft sensing |
Rear lift | 14480 lbs
6568 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/1000 |
540/750/1000 (optional) | |
Dimensions & Tires | |
|---|---|
Wheelbase | 109.5 inches
278 cm |
Weight | 11686 lbs
5300 kg |
Front tire | 16.9-28 |
Rear tire | 20.8-38 |
Full dimensions and tires ... | |
Engine
Engine Detail — 357.64 ci / 5.9 L Diesel
Manufacturer | Iveco 8065.25 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 357.64 ci
5.9 L |
Bore/Stroke | 4.0945x4.53 inches
104 x 115 mm |
Power | 140 hp
104.4 kW |
Rated RPM | 2250 |
Starter type | electric |
Transmission
Transmission — Hi-Lo
Transmission | Hi-Lo |
Gears | 24 forward and 12 reverse |
Clutch | hydraulic cerametallic dry disc |
Available in 30 KPH and 40 KPH versions. Also available as a 48-24 speed creeper. | |
Dimensions
Fiat F140 Tires | |
|---|---|
Standard tires (ag) | Front: 16.9-28. Rear: 20.8-38 |
Optional tires (ag) | Front: 420/70R28. Rear: 520/70R38 |
Front: 480/70R28. Rear: 580/70R38 | |
Dimensions | |
|---|---|
Wheelbase | 109.5 inches
278 cm |
Length | 183.1 inches
465 cm |
Height | 110.6 inches
280 cm |
Weight | 11686 lbs
5300 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Fiat F140 based on its 140 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fiat F140.
Estimated Continuous Field Runtime: 8 hrs
Approximately 8 hours of continuous field operation at ~75% rated power on a full tank (58.1 gal / 219.9 L).
Estimated 75% Load Fuel Burn~7.3 gal/hr (27.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fiat F140 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fiat F140.
Converted Equivalents:
Horsepower (HP)140 hp
Kilowatts (kW)104.4 kW
Metric Horsepower (PS / CV)141.9 PS
Direct Competitor Comparison
Compare Fiat F140 against same-era industry alternatives in the same horsepower class.
Current Model
Fiat
Fiat F140
Engine Power:Diesel (listed): 140 hp / 104.4 kW
★ Baseline Reference
Related models
Fiat 900E
- Power:
- 113
- Production years:
- 1974 - 1980
Fiat 115-90
- Power:
- 115
- Production years:
- 1984 - 1990
Fiat 1180
- Power:
- 115
- Production years:
- 1979 - 1984
Fiat F115
- Power:
- 115
- Production years:
- 1993 - 1996
Fiat M115
- Power:
- 115
- Production years:
- 1996 - 1999

