fiat m115
 | 1996 - 1999 | 1996 - 1999 |
|---|---|---|
1996 - 1999 | ||
1996 - 1999 |
|---|
Production | |
|---|---|
Manufacturer | Fiat |
Built in England | |
Original price | $48,000 (1999) |
Variants | |
|---|---|
8260 | similar New Holland model |
Fiat M115 Engine | |
|---|---|
New Holland 7.5L 6-cyl diesel | |
Engine details ...  |
Fiat M115 Transmissions | |
|---|---|
23-speed partially synchronized | |
17-speed partial power shift | |
18-speed partial power shift | |
Transmission details ...  |
Fiat M115 Power | |
|---|---|
Engine | 115 hp
85.8 kW |
PTO (claimed) | 100 hp
74.6 kW |
Drawbar (tested) | 88 hp
65.6 kW |
PTO (tested) | 107 hp
79.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
| 4x4 MFWD 4WD (optional) |
Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
Steering | hydrostatic power |
Differential hydraulic wet disc brakes | |
Two-post ROPS. Optional cab. | |
Capacity | |
|---|---|
Fuel | 85 gal
321.7 L |
Hydraulic system | 23.7 gal (18-speed)
89.7 L |
| 19.2 gal (23-speed)
72.7 L |
Front hubs | 1.8 qts (each)
1.7 L |
Front diff. | 2.3 qts
2.2 L |
Hydraulics | |
|---|---|
Type | closed center load sensing |
Capacity | 23.7 gal (18-speed)
89.7 L |
| 19.2 gal (23-speed)
72.7 L |
Pressure | 2755 psi
190.0 bar |
Valves | 2 to 4 |
Pump flow | 26 gpm
98.4 lpm |
Steering flow | 15.6 gpm
59.0 lpm |
Steering press. | 2465 psi
170.0 bar |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 8,500 lbs
3855 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 108.3 inches (2WD)
275 cm |
| 107.2 inches (4WD)
272 cm |
Weight | 11616 to 12606 pounds |
Front tire | 11.00-16 |
Rear tire | 18.4R38 (2WD) |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 70 |
| 100 (with cab) |
Batteries | 2 |
Battery CCA | 900 |
Battery volts | 12 |
Recommended Products
Advertisement · Featured Tractor-Related Products
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
AM116304: Inline Fuel Filter
for Kohler 25 050 22-S, 25 050 03-S ,25 050 08-S Fits 1/4-inch and 5/16-inch ID Fuel Line. for John Deere AM116304 AM1163041 GY20709 for Small Engine GKI VW312 6mm-8mm 1/4 Plastic Inline Gas/Fuel Filter G1000 G4164
M805853: Spark Plug
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties Corrugated ribs prevent flashover Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer Copper core aids in heat removal
Classic Tractors: Complete Encyclopedia
Comprehensive guide to classic tractor models from all major brands
* This page contains affiliate links, purchases may generate revenue for this site