Ford 1910
The Ford 1910 is a tractor produced by Ford. It is equipped with a 103.8 ci 1.7 L engine. The listed engine power is Diesel (listed): 32 hp / 23.9 kW. Transmission: 12 forward and 4 reverse. Operating weight: 2980 to 3246 pounds.
Engine Power
Diesel (listed): 32 hp / 23.9 kW
Fuel & Capacities
9.2 gal
34.8 L
Transmission
12 forward and 4 reverse
Operating Weight
2980 to 3246 pounds
Overview
 | 1983 - 1986
Ten Compact SeriesCompact Utility tractorShibaura built
Ten Compact Series
Compact Utility tractor
Shibaura built |
|---|
Production | |
|---|---|
Distributor | Ford |
Manufacturer | Shibaura |
Compact Utility tractor | |
Built in Japan | |
Original price was $10,000 in 1986 | |
Ford 1910 Engine | |
|---|---|
Shibaura 1.7L 3-cyl diesel | |
Engine details ...  |
Ford 1910 Power | |
|---|---|
Engine | 32 hp
23.9 kW |
PTO (claimed) | 28.5 hp
21.3 kW |
Drawbar (tested) | 24.76 hp
18.5 kW |
PTO (tested) | 28.60 hp
21.3 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Steering | manual |
power (4WD) | |
Differential mechanical drum brakes | |
Two-post fixed ROPS. | |
Capacity | |
|---|---|
Fuel | 9.2 gal
34.8 L |
Hydraulic system | 7.4 gal
28.0 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 7.4 gal
28.0 L |
Pressure | 2133 psi
147.1 bar |
Pump flow | 5.1 gpm
19.3 lpm |
Total flow | 8.6 gpm
32.6 lpm |
Steering flow | 3.5 gpm
13.2 lpm |
Steering press. | 1000 psi
69.0 bar |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
draft control OptOptional | |
Rear lift (at ends) | 3813 lbs
1729 kg |
Rear lift (at 24"/610mm) | 1584 lbs
718 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@2456 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 66.3 inches
168 cm |
4WD Wheelbase | 66.9 inches
169 cm |
Weight | 2980 to 3246 pounds |
Front tire | 5.50-16 |
2WD Rear tire | 13.6-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 35 |
Charging volts | 12 |
Battery volts | 12 |
Battery AH | 100 |
References | |
|---|---|
 | |
Ford Shop Manual by Peter Letourneau | |
Farm Loaders published in 1988, by Ford | |
1000 Series Tractors published in 1985, by Ford | |
1000 Series Tractors published in 1987, by Ford | |
Salesman's Reference published in 1986, by Ford | |
Sales Reference Guide published in 1986, by Ford |
Engine
Engine Detail — 103.8 ci / 1.7 L Diesel
Manufacturer | Shibaura |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 103.8 ci
1.7 L |
Bore/Stroke | 3.346x3.947 inches
85 x 100 mm |
Power | 32 hp
23.9 kW |
Fuel use | 2.236 gal/hour
8.5 l/hour |
Air cleaner | dry |
Pre-heating | glow plugs |
Compression | 21:1 |
Rated RPM | 2500 |
Torque | 70.9 lb-ft
96.1 Nm |
Torque RPM | 2000 |
Starter volts | 12 |
Oil capacity | 6.9 qts
6.5 L |
Coolant capacity | 7.4 qts
7.0 L |
Transmission
Transmission options | |
|---|---|
12-speed unsynchronized gear | |
12-speed partially synchronized |
Transmission — 12 forward and 4 reverse unsynchronized gear
Type | unsynchronized gear |
Gears | 12 forward and 4 reverse |
Clutch | 239mm dry disc |
Oil capacity | 29.6 qts
28.0 L |
Three gears, plus reverse, in four ranges. | |
With 13.6-24 rear tires. | |
 | |
Transmission — 12 forward and 4 reverse partially synchronized
Type | partially synchronized |
Gears | 12 forward and 4 reverse |
 | |
Dimensions
Ford 1910 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 5.50-16. Rear: 13.6-24 |
4WD Standard tires (ag) | Front: 6.00-16. Rear: 13.6-24 |
Lawn/turf front | 25x8.50-14 (2WD) |
27x8.50-15 (4WD) | |
Lawn/turf rear | 18.4x16.1 |
Dimensions | |
|---|---|
2WD Wheelbase | 66.3 inches
168 cm |
4WD Wheelbase | 66.9 inches
169 cm |
2WD Length | 122.6 inches
311 cm |
4WD Length | 123.2 inches
312 cm |
Width | 57.8 inches
146 cm |
2WD Ground clearance | 13.7 inches
34 cm |
4WD Ground clearance | 13.1 inches
33 cm |
Front tread | 44.9 to 59.5 inches
114 to 151 cm |
Rear tread | 45.7 to 61 inches
116 to 154 cm |
Ford 1910 Weight | |
|---|---|
2WD | 2980 lbs
1351 kg |
4WD | 3246 lbs
1472 kg |
Ballasted | 4250 lbs*Two-wheel drive tractor with front and rear iron weight, plus liquid in rear 13.6-24 tires.
1927 kg |
2WD Max front axle | 2425 lbs
1099 kg |
4WD Max front axle | 2535 lbs
1149 kg |
Ford 1910 Height | |
|---|---|
2WD Steering wheel | 61.6 inches
156 cm |
4WD Steering wheel | 60.5 inches
153 cm |
ROPS | 87 inches
220 cm |
2WD Exhaust | 77.4 inches
196 cm |
4WD Exhaust | 76.7 inches
194 cm |
Tests
Tractor Tests | |
|---|---|
NTTL 1507: diesel 12/4 gear 2WD | |
NTTL 1508: diesel 12/4 synchro 2WD |
Nebraska Tractor Test 1507 | |
|---|---|
Diesel 12/4 gear 2WD
March 30 - April 12, 1984
Link: Nebraska Tractor Test 1507 file | |
PTO performance | |
Power at rated engine speed | 28.60 hp
21.3 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Power at rated PTO speed | 28.29 hp
21.1 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Drawbar performance | |
Max power | 24.76 hp
18.5 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Gear 3-3 used for power test. | |
Max pull | 3,340 lbs
1515 kg |
Gear 2-3 used for pull test. | |
Nebraska Tractor Test 1508 | |
|---|---|
Diesel 12/4 synchro 2WD
March 30 - April 17, 1984
Link: Nebraska Tractor Test 1508 file | |
PTO performance | |
Power at rated engine speed | 28.52 hp
21.3 kW |
Fuel use | 2.3 gal/hour
8.7 l/hour |
Power at rated PTO speed | 28.30 hp
21.1 kW |
Fuel use | 2.3 gal/hour
8.7 l/hour |
Drawbar performance | |
Max power | 24.57 hp
18.3 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Gear 3-3 used for power test. | |
Max pull | 2,566 lbs
1163 kg |
Gear 2-3 used for pull test. | |
Attachments
Attachment overview | |
|---|---|
60" mid-mount mower deck | |
Snowblower | |
Ford 770A loader | |
Ford 770B loader | |
Backhoe | |
In addition to the mid-mount mowing deck, the Ford 1910 was matched for the 930A rear finish mower in 59 or 72 inch widths. It could also use the 939 and 940 60-inch rotary cutters, and the 917 flail mowers (62 or 74 inch). In addition to a loader and backhoe, the model 706 10-cubic-foot rear scoop was available. Up to 72-inch front blades and 84-inch rear blades could be fitted on the 1910, and a 96-inch landscape rake. Rear tillers were available in 48 and 54-inch widths. Ford listed two-bottom plows, 82-inch disc harrows, and 72-inch cultivators as matched equipment. |
60" Mower deck | |
|---|---|
Type | mid-mount Ford 915 |
3-blade | |
Cutting width | 60 inches
152 cm |
Ford 757A Backhoe | |
|---|---|
Backhoe type | Ford 757A Backhoe |
Bucket width | 8 inches
20 cm |
13 inches
33 cm | |
16 inches
40 cm | |
Digging depth | 76.5 inches
194 cm |
2-Foot flat digging depth | 74.5 inches
189 cm |
8-Foot flat digging depth | 40.3 inches
102 cm |
Reach from pivot | 107 inches
271 cm |
Loading height | 70 inches
177 cm |
Dipperstick force | 719 lbs
326 kg |
Ford 758A Backhoe | |
|---|---|
Backhoe type | Ford 758A Backhoe |
Bucket width | 8 inches
20 cm |
13 inches
33 cm | |
16 inches
40 cm | |
Digging depth | 96 inches
243 cm |
2-Foot flat digging depth | 94 inches
238 cm |
8-Foot flat digging depth | 56 inches
142 cm |
Reach from pivot | 140.4 inches
356 cm |
Loading height | 83.6 inches
212 cm |
Dipperstick force | 726 lbs
329 kg |
Photos
Ford 1910 advertising photo.
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 1910 based on its 32 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 1910.
Estimated Continuous Field Runtime: 5.5 hrs
Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (9.2 gal / 34.8 L).
Estimated 75% Load Fuel Burn~1.7 gal/hr (6.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 1910 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 1910.
Converted Equivalents:
Horsepower (HP)32 hp
Kilowatts (kW)23.9 kW
Metric Horsepower (PS / CV)32.4 PS
Direct Competitor Comparison
Compare Ford 1910 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 1910
Engine Power:Diesel (listed): 32 hp / 23.9 kW
★ Baseline Reference