Ford 4830
The Ford 4830 is a tractor produced by Ford. It is equipped with a 255.7 ci 4.2 L engine. The listed engine power is Diesel (listed): 65 hp / 48.5 kW. Transmission: 8 forward and reverse. Operating weight: 6527 to 7497 pounds.
Engine Power
Diesel (listed): 65 hp / 48.5 kW
Fuel & Capacities
17.2 gal
65.1 L
Transmission
8 forward and reverse
Operating Weight
6527 to 7497 pounds
Overview
 | 1990 - 1993
30 Utility SeriesUtility tractor
30 Utility Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford |
Utility tractor | |
Ford 4830 Engine | |
|---|---|
Ford 4.2L 4-cyl diesel | |
Fuel tank | 17.2 gal
65.1 L |
Engine details ...  | |
Ford 4830 Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
Ford 4830 Power | |
|---|---|
Engine | 65 hp
48.5 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Two-post ROPS. |
Hydraulics | |
|---|---|
Total flow | 14.3 gpm
54.1 lpm |
Tractor hitch | |
|---|---|
Rear lift | 5,799 lbs
2630 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 89.8 inches
228 cm |
Weight | 6527 to 7497 pounds |
Front tire | 7.50-18 |
Rear tire | 13.6R36 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
Front-End Loader 7310 published in 1994, by Ford | |
Front-end Loaders published in 1992, by Ford | |
Front-end Loaders published in 1995, by New Holland |
Engine
Engine Detail — 255.7 ci / 4.2 L Diesel
Manufacturer | Ford |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 255.7 ci
4.2 L |
Bore/Stroke | 4.41x4.21 inches
112 x 107 mm |
Power | 65 hp
48.5 kW |
Rated RPM | 2200 |
Torque | 58.4 lb-ft
79.2 Nm |
Torque RPM | 1200 |
Starter volts | 12 |
Transmission
Transmission — 8 forward and 2 reverse
Gears | 8 forward and 2 reverse |
Transmission — 8 forward and reverse
Gears | 8 forward and reverse |
Dimensions
Ford 4830 Tires | |
|---|---|
Ag front | 7.50-18 (2WD) |
11.2R28 (4WD) | |
Ag rear | 13.6R36 |
Dimensions | |
|---|---|
Wheelbase | 89.8 inches
228 cm |
Length | 150.4 inches
382 cm |
Height | 98.8 inches
250 cm |
2WD Weight | 6527 lbs
2960 kg |
4WD Weight | 7497 lbs
3400 kg |
Attachments
Attachment overview | |
|---|---|
Ford 7210 loader | |
Ford 7310 loader | |
Ford 7410 loader |
Photos
Ford 4830, right side.
Ford 4830, left side.
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 4830 based on its 65 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 4830.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (17.2 gal / 65.1 L).
Estimated 75% Load Fuel Burn~3.4 gal/hr (12.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 4830 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 4830.
Converted Equivalents:
Horsepower (HP)65 hp
Kilowatts (kW)48.5 kW
Metric Horsepower (PS / CV)65.9 PS
Direct Competitor Comparison
Compare Ford 4830 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 4830
Engine Power:Diesel (listed): 65 hp / 48.5 kW
★ Baseline Reference