Ford 7610S
The Ford 7610S is a tractor produced by Ford. It is equipped with a 304 ci 5.0 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: Dual Power. Operating weight: 5935 to 6575 pounds.
Engine Power
Diesel (listed): 95 hp / 70.8 kW
Fuel & Capacities
21.5 gal
81.4 L
Transmission
Dual Power
Operating Weight
5935 to 6575 pounds
Overview
 | 1994 - 2000
10S SeriesUtility tractor
10S Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford |
Utility tractor | |
Built in Queretaro, Mexico | |
Original price | $31,500 (2000) |
Ford 7610S Engine | |
|---|---|
Ford 5.0L 4-cyl diesel | |
Engine details ...  |
Ford 7610S Power | |
|---|---|
Engine | 95 hp
70.8 kW |
PTO (claimed) | 86 hp
64.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Two-post ROPS. | |
Capacity | |
|---|---|
Fuel | 21.5 gal
81.4 L |
13.2 gal (aux. tank)
50.0 L | |
Steering | 2.3 qts
2.2 L |
Hydraulics | |
|---|---|
Type | gear pump |
Pressure | 2500 psi
172.4 bar |
Valves | 2 |
Pump flow | 9.7 gpm
36.7 lpm |
Steering flow | 9.6 gpm
36.3 lpm |
Steering cap. | 2.3 qts
2.2 L |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position control with top-link draft sensing |
Rear lift | 4040 lbs
1832 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1900 |
1000@2060 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 87.5 inches
222 cm |
4WD Wheelbase | 88.8 inches
225 cm |
Weight | 5935 to 6575 pounds |
Front tire | 7.50-16 |
Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Charging volts | 12 |
Battery volts | 12 |
References | |
|---|---|
 | |
10S Series 66 to 90 PTO hp Tractors published in 1995, by Ford |
Engine
Engine Detail — 304 ci / 5.0 L Diesel
Manufacturer | Ford |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 304 ci
5.0 L |
Bore/Stroke | 4.4x5.0 inches
112 x 127 mm |
Power | 95 hp
70.8 kW |
Compression | 17.5:1 |
Rated RPM | 2100 |
Firing order | 1-3-4-2 |
Starter volts | 12 |
Oil capacity | 12 qts
11.4 L |
Coolant capacity | 13.75 qts
13.0 L |
Intake valve clearance | 0.016 inches (cold)
0.406 mm |
Exhaust valve clearance | 0.019 inches (cold)
0.483 mm |
Transmission
Transmission options | |
|---|---|
8-speed unsynchronized gear | |
16-speed two-speed power shift |
Transmission — 8 forward and 2 reverse unsynchronized gear
Type | unsynchronized gear |
Gears | 8 forward and 2 reverse |
Four gears, plus reverse, in two ranges. Tractor must be stopped, and clutch used, before shifting gear or range. | |
 | |
Transmission — Dual Power
Transmission | Dual Power |
Type | two-speed power shift |
Gears | 16 forward and 4 reverse |
Dimensions
Ford 7610S Tires | |
|---|---|
Ag front | 7.50-16 (2WD) |
14.9x24 (4WD) | |
Ag rear | 16.9-30 |
Dimensions | |
|---|---|
2WD Wheelbase | 87.5 inches
222 cm |
4WD Wheelbase | 88.8 inches
225 cm |
2WD Length | 145.2 inches
368 cm |
4WD Length | 153.1 inches
388 cm |
Height (ROPS) | 95.9 inches
243 cm |
2WD Weight | 5935 lbs
2692 kg |
4WD Weight | 6575 lbs
2982 kg |
2WD Ground clearance | 18.4 inches
46 cm |
4WD Ground clearance | 17.8 inches
45 cm |
Photos
Ford 7610S tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 7610S based on its 95 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 7610S.
Estimated Continuous Field Runtime: 4.4 hrs
Approximately 4.4 hours of continuous field operation at ~75% rated power on a full tank (21.5 gal / 81.4 L).
Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 7610S Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 7610S.
Converted Equivalents:
Horsepower (HP)95 hp
Kilowatts (kW)70.8 kW
Metric Horsepower (PS / CV)96.3 PS
Direct Competitor Comparison
Compare Ford 7610S against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 7610S
Engine Power:Diesel (listed): 95 hp / 70.8 kW
★ Baseline Reference