Ford 876
The Ford 876 is a tractor produced by Ford. It is equipped with a 611 ci 10.0 L engine. The listed engine power is Diesel (listed): 280 hp / 208.8 kW. Transmission: Versatile. Operating weight: 18100 to 24900 pounds.
Engine Power
Diesel (listed): 280 hp / 208.8 kW
Fuel & Capacities
246 gal
931.1 L
Transmission
Versatile
Operating Weight
18100 to 24900 pounds
Overview
 | 1989 - 1993
800 SeriesFour-wheel Drive (4WD) tractor
800 Series
Four-wheel Drive (4WD) tractor |
|---|
Series map: 846876230.0hp280.0hp
Note: the Ford model 876 is the same as the Versatile 876. The following data is from the 876 listing. |
Production | |
|---|---|
Manufacturer | Ford |
Four-wheel Drive (4WD) tractor | |
Built in Winnipeg, Manitoba, Canada | |
Original price was $93,000 in 1993 | |
Ford 876 Engine | |
|---|---|
Cummins 10.0L 6-cyl diesel | |
Engine details ...  |
Ford 876 Power | |
|---|---|
Engine | 280 hp
208.8 kW |
PTO (claimed) | 246 hp
183.4 kW |
Drawbar (tested) | 228.33 hp
170.3 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | outboard planetary |
inboard planetary (row-crop axle) | |
Articulated power steering | |
Hydraulic disc brakes | |
Cab standard with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 246 gal
931.1 L |
Hydraulic system | 15.3 gal
57.9 L |
Hydraulics | |
|---|---|
Type | closed center load sensing *Steering pump is open center. |
Capacity | 15.3 gal
57.9 L |
Pressure | 2250 psi
155.1 bar |
Valves | 4 to 5 |
Pump flow | 25.2 gpm
95.4 lpm |
Steering flow | 25.9 gpm
98.0 lpm |
Steering press. | 2300 psi
158.6 bar |
Tractor hitch | |
|---|---|
Rear Type | IVN/III |
Control | position control |
Rear lift (at 24"/610mm) | 10313 lbs (III)
4677 kg |
13036 lbs (IV/III)
5913 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 (1.75) |
Dimensions & Tires | |
|---|---|
Wheelbase | 130 inches
330 cm |
Weight | 18100 to 24900 pounds |
Front tire | 20.8x38 |
Rear tire | 20.8x38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 90 |
Batteries | 4 |
Battery CCA | 625 |
Battery volts | 12 |
References | |
|---|---|
 | |
Versatile 230 to 360 hp 4WD Tractors published in 1989, by Ford | |
Tractor Buyer's Guide published in 1989, by Ford |
Engine
Series map: 846876230.0hp280.0hp
Note: the Ford model 876 is the same as the Versatile 876. The following data is from the 876 listing. |
Engine Detail — 611 ci / 10.0 L Diesel
Manufacturer | Cummins LT10-A280 |
Configuration | aftercooled turbocharged diesel, 6-cylinder, liquid-cooled inline |
Displacement | 611 ci
10.0 L |
Bore/Stroke | 4.921x5.354 inches
125 x 136 mm |
Power | 280 hp
208.8 kW |
Air cleaner | dual dry element |
Pre-heating | ether injection |
block heater | |
Compression | 16:1 |
Rated RPM | 2100 |
Torque | 895 lb-ft
1213.6 Nm |
Torque RPM | 1300 |
Starter volts | 12 |
Oil capacity | 28 qts
26.5 L |
Coolant capacity | 56.5 qts
53.5 L |
Ford 876 Engine | |
|---|---|
 |
Transmission
Series map: 846876230.0hp280.0hp
Note: the Ford model 876 is the same as the Versatile 876. The following data is from the 876 listing. |
Transmission options | |
|---|---|
12-speed constant mesh | |
12-speed full power shift |
Transmission — Versatile
Transmission | Versatile |
Type | constant mesh |
Gears | 12 forward and 4 reverse |
Clutch | 356mm dry disc |
Oil capacity | 21.5 qts
20.3 L |
 | |
Transmission — 12 forward and 2 reverse full power shift
Type | full power shift |
Gears | 12 forward and 2 reverse |
Clutch | 228mm wet disc |
Oil capacity | 18 qts
17.0 L |
 | |
Dimensions
Series map: 846876230.0hp280.0hp
Note: the Ford model 876 is the same as the Versatile 876. The following data is from the 876 listing. |
Ford 876 Tires | |
|---|---|
Ag front | 20.8x38 |
Ag rear | 20.8x38 |
Ag front | 18.4x38 |
18.4x42 | |
24.5x32 | |
30.5x32 | |
Ag rear | 18.4x38 |
18.4x42 | |
24.5x32 | |
30.5x32 | |
Dimensions | |
|---|---|
Wheelbase | 130 inches
330 cm |
Length | 260 inches
660 cm |
Ground clearance | 16.1 inches
40 cm |
Front axle | Bar: 4 inch diameter
101 mm |
Front axle | Flange |
Bar rear axle | 4 inch diameter
101 mm |
Flange rear axle | |
Ford 876 Weight | |
|---|---|
Shipping | 18100 lbs
8210 kg |
Operating | 24900 lbs (20.8-38 duals)
11294 kg |
Max capacity | 29500 lbs
13381 kg |
Ford 876 Height | |
|---|---|
Steering wheel | 102.4 inches
260 cm |
Cab | 125 inches
317 cm |
Exhaust | 131 inches
332 cm |
Tests
Series map: 846876230.0hp280.0hp
Note: the Ford model 876 is the same as the Versatile 876. The following data is from the 876 listing. |
Nebraska Tractor Test 1569 | |
|---|---|
Diesel manual 4WD
May 21 - 29, 1985
Link: Nebraska Tractor Test 1569 file | |
Drawbar performance | |
Max power | 228.33 hp
170.3 kW |
Fuel use | 13.6 gal/hour
51.5 l/hour |
Gear 2-3 used for power test. | |
Max pull | 27,703 lbs
12566 kg |
Gear 1-2 used for pull test. | |
Photos
Ford 876 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 876 based on its 280 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 876.
Estimated Continuous Field Runtime: 16.9 hrs
Approximately 16.9 hours of continuous field operation at ~75% rated power on a full tank (246 gal / 931.2 L).
Estimated 75% Load Fuel Burn~14.6 gal/hr (55.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 876 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 876.
Converted Equivalents:
Horsepower (HP)280 hp
Kilowatts (kW)208.8 kW
Metric Horsepower (PS / CV)283.9 PS
Direct Competitor Comparison
Compare Ford 876 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 876
Engine Power:Diesel (listed): 280 hp / 208.8 kW
★ Baseline Reference
Related models
Ford 846
- Power:
- 230
- Production years:
- 1989 - 1993
Ford 8970
- Power:
- 240
- Production years:
- 1993 - 2002
Ford FW-30
- Power:
- 265
- Production years:
- 1977 - 1982
Ford FW-40
- Power:
- 295
- Production years:
- 1977 - 1979
Ford 946
- Power:
- 325
- Production years:
- 1989 - 1993