Ford-New Holland 4130

The Ford-New Holland 4130 is a tractor produced by Ford New Holland. It is equipped with a 201 ci 3.3 L engine. The listed engine power is Diesel (listed): 63 hp / 47.0 kW. Transmission: 8 forward and reverse. Operating weight: 4630 lbs 2100 kg.

Engine Power

Diesel (listed): 63 hp / 47.0 kW

Fuel & Capacities

17.3 gal 65.5 L

Transmission

8 forward and reverse

Operating Weight

4630 lbs 2100 kg

Overview

	1990 - 1991 Utility tractor

Note: the Ford-New Holland model 4130 is the same as the Ford 4130. The following data is from the 4130 listing.

Production
Manufacturer	Ford-New Holland
Utility tractor

Ford-New Holland 4130 Engine
Ford 3.3L 3-cyl diesel
Fuel tank	17.3 gal 65.5 L
Engine details ...

Ford-New Holland 4130 Transmission
8-speed
Transmission details ...

Ford-New Holland 4130 Power
Engine	63 hp 47.0 kW
PTO (claimed)	55 hp 41.0 kW

Mechanical
Two- or four-wheel drive
Power steering
Cab optional

Hydraulics
Type	open center
Valves	1
Pump flow	7.7 gpm 29.1 lpm

Tractor hitch
Rear Type	II
Rear lift	3,080 lbs 1397 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540
Engine RPM	540@1450

Dimensions & Tires
Wheelbase	84.5 inches 214 cm
Weight	4630 lbs 2100 kg
Front tire	6.00-16
Rear tire	12.4-28
Full dimensions and tires ...

Engine

Note: the Ford-New Holland model 4130 is the same as the Ford 4130. The following data is from the 4130 listing.

Engine Detail — 201 ci / 3.3 L Diesel

Manufacturer	Ford
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	201 ci 3.3 L
Bore/Stroke	4.4x4.4 inches 112 x 112 mm
Power	63 hp 47.0 kW
Rated RPM	2200
Starter volts	12
Coolant capacity	11 qts 10.4 L

Transmission

Note: the Ford-New Holland model 4130 is the same as the Ford 4130. The following data is from the 4130 listing.

Transmission — 8 forward and 2 reverse

Gears

8 forward and 2 reverse

Transmission — 8 forward and reverse

Gears

8 forward and reverse

Dimensions

Note: the Ford-New Holland model 4130 is the same as the Ford 4130. The following data is from the 4130 listing.

Ford-New Holland 4130 Tires
Ag front	6.00-16
Ag rear	12.4-28

Dimensions
Wheelbase	84.5 inches 214 cm
Length	138.6 inches 352 cm
Height	92.5 inches 234 cm
Weight	4630 lbs 2100 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Ford New Holland Ford-New Holland 4130 based on its 63 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ford New Holland Ford-New Holland 4130.

Estimated Continuous Field Runtime: 5.3 hrs

Approximately 5.3 hours of continuous field operation at ~75% rated power on a full tank (17.3 gal / 65.5 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Ford New Holland Ford-New Holland 4130 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford New Holland Ford-New Holland 4130.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)63 hp

Kilowatts (kW)47 kW

Metric Horsepower (PS / CV)63.9 PS

Direct Competitor Comparison

Compare Ford-New Holland 4130 against same-era industry alternatives in the same horsepower class.

Current Model

Ford New Holland