Hefty G

The Hefty G is a tractor produced by Hefty. It is equipped with a 51.6 ci 0.8 L engine. The listed engine power is Gasoline (listed): 27 hp / 20.1 kW. Transmission: 6 forward and 1 reverse. Operating weight: 2100 lbs 952 kg.

Engine Power
Gasoline (listed): 27 hp / 20.1 kW
Fuel & Capacities
Gasoline
Transmission
6 forward and 1 reverse
Operating Weight
2100 lbs 952 kg

Overview

Hefty G tractor photo
1974 - 1978 Tool Carrier tractor
Production
Manufacturer
Hefty
Tool Carrier tractor
Built in Juneau, Wisconsin, USA
Variants
Hi-G
high-crop tractor
Hefty G Engine
Continental 0.8L 4-cyl gasoline
Engine details ...
Hefty G Transmission
6-speed gear
Transmission details ...
Hefty G Power
Engine
27 hp 20.1 kW
PTO (claimed)
24 hp 17.9 kW
Mechanical
Two-wheel drive
Steering
manual
Steering
power OptOptional
Mechanical disc brakes
Open operator station.
Hydraulics
Type
open center
Pressure
2000 psi 137.9 bar
Valves
2
Pump flow
3.2 gpm 12.1 lpm
Tractor hitch
Rear Type
I
Power Take-off (PTO)
Rear PTO
independent OptOptional
Rear PTO Type
540 (1.375)
1000 (1.375)
Mid PTO
independent OptOptional
Mid PTO Type
540 (1.375)
1000 (1.375)
Dimensions & Tires
Wheelbase
75 inches*Multipile position front axle allows for a wheelbase range of 75 to 89 inches. 190 cm
Weight
2100 lbs 952 kg
Front tire
5.00-15
Rear tire
9.5-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
G references literature
G - Implements published by Hefty
G published by Hefty

Engine

Engine Detail — 51.6 ci / 0.8 L Gasoline

Manufacturer
Continental R800-46
Fuel Type
Gasoline
Configuration
4-cylinder, liquid-cooled
The Continental R800 engine was built by Renault.
Displacement
51.6 ci 0.8 L
Bore/Stroke
2.28x3.14 inches 58 x 80 mm
Power
27 hp 20.1 kW
Compression
8:1
Rated RPM
3300
Firing order
1-3-4-2
Starter
electric
Starter volts
12

Transmission

Transmission — 6 forward and 1 reverse gear

Type
gear
Gears
6 forward and 1 reverse
Clutch
mechanical dry disc
With 9.5-24 rear tires.
G  gear speeds

Dimensions

Hefty G Tires
Ag front
5.00-15
Ag rear
9.5-24
Ag front
6.50-16
Ag rear
11.2-24
12.4-24
12.4-28
Dimensions
Wheelbase
75 inches*Multipile position front axle allows for a wheelbase range of 75 to 89 inches. 190 cm
Length
126 inches*At closest wheelbase position. 320 cm
Height (steering wheel)
64 inches 162 cm
Shipping weight
2100 lbs 952 kg
Front tread
40 to 60 inches 101 to 152 cm
Rear tread
36 to 62 inches 91 to 157 cm

Attachments

Attachment overview
60" mid-mount mower deck
Blade
The Hefty G had a range of attachments available including cultivators, sprayers, fertilizers, and planters by Stanhay and Gandy.
60" Mower deck
Type
mid-mount Hefty
3-blade
Cutting width
60 inches 152 cm

Photos

Hefty G tractor photo

Hefty G tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hefty G based on its 27 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hefty G.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Hefty G Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Hefty G.

Converted Equivalents:

Horsepower (HP)27 hp
Kilowatts (kW)20.1 kW
Metric Horsepower (PS / CV)27.4 PS

Direct Competitor Comparison

Compare Hefty G against same-era industry alternatives in the same horsepower class.

Current Model
Hefty

Hefty G

Engine Power:Gasoline (listed): 27 hp / 20.1 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1225

Engine Power:24.3
Production Years:1999 - 2002
DeereMarket Competitor

Deere 3025D

Engine Power:24.4
Production Years:2019 - 2026
New HollandMarket Competitor

New Holland Workmaster 25

Engine Power:24.4
Production Years:2018 - 2026
AGCOMarket Competitor

AGCO ST25

Engine Power:24.3
Production Years:2001 - 2004
  • Hefty F

    Power:
    27
    Production years:
    1974 - 1978
  • Hefty Hi-G

    Power:
    27
    Production years:
    1974 - 1978
  • Hefty LNT

    Power:
    27
    Production years:
    1974 - 1978