New Holland Workmaster 25

The New Holland Workmaster 25 is a tractor produced by New Holland. It is equipped with a 80.4 ci 1.3 L engine. The listed engine power is Diesel (gross): 24.4 hp / 18.2 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 1092 lbs 495 kg.

Engine Power

Diesel (gross): 24.4 hp / 18.2 kW

Fuel & Capacities

7.4 gal 28.0 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

1092 lbs 495 kg

Overview

	2018 - Compact Utility tractor
2018 -
Compact Utility tractor

Production
Manufacturer	New Holland
Compact Utility tractor
Original price was $15,259 in 2019

Variants
Farmall 25A	similar CaseIH model

New Holland Workmaster 25 Engine
Mitsubishi 1.3L 3-cyl diesel
Fuel tank	7.4 gal 28.0 L
Engine details ...

New Holland Workmaster 25 Power
Engine (gross)	24.4 hp 18.2 kW
Gear PTO (claimed)	19.2 hp 14.3 kW
Hydro PTO (claimed)	17.1 hp 12.8 kW

Mechanical
Four-wheel drive
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Valves	1 or 2
Pump flow	7.9 gpm 29.9 lpm
Total flow	12.5 gpm 47.3 lpm
Steering flow	4.6 gpm 17.4 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1808 lbs 820 kg
Rear lift (at 24"/610mm)	1433 lbs 650 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540 (1.375)
Mid PTO	independent *Mid PTO standard with hydrostatic transmission, optional with gear transmission.
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	65.9 inches 167 cm
Weight	2469 lbs 1119 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	50
Battery CCA	660
Battery volts	12
Battery AH	80

References

Under 60-HP Tractors published in 2017, by New Holland

Engine

Engine Detail — 80.4 ci / 1.3 L Diesel

Manufacturer	Mitsubishi S3L2
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	80.4 ci 1.3 L
Bore/Stroke	3.07x3.62 inches 78 x 92 mm
Emissions	Tier IV
Power (gross)	24.4 hp 18.2 kW
Pre-heating	glow plugs
Rated RPM	2500
Starter	electric
Starter volts	12

New Holland Workmaster 25 Engine

Transmission

Transmission options
12-speed sync shuttle
hydrostatic

Transmission — 12 forward and reverse sync shuttle

Type	sync shuttle
Gears	12 forward and reverse
Four gears in three ranges with synchronized shuttle shift.

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

New Holland Workmaster 25 Tires
Industrial front	25x8.50-14
Industrial rear	43x16.00-230

Dimensions
Wheelbase	65.9 inches 167 cm
Length	117.2 inches 297 cm
Width	54.1 inches 137 cm
Height (ROPS)	88.2 inches 224 cm
Weight	2469 lbs 1119 kg
Flange rear axle
Front tread	45.6 inches 115 cm
Rear tread	50.5 inches 128 cm

Attachments

Attachment overview
Snowblower
Blade
Front-end loader
Backhoe

New Holland 910GBL Backhoe
Backhoe type	New Holland 910GBL Backhoe
Weight	1092 lbs 495 kg
Transport height	77.2 inches 196 cm
Digging depth	76.4 inches 194 cm
Reach from pivot	113.2 inches 287 cm
Loading height	63.6 inches 161 cm
Bucket Rotation	180°
Swing Arc	180°
Bucket force	2817 lbs 1277 kg
Dipperstick force	1748 lbs 792 kg

Photos

New Holland Workmaster 25

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland Workmaster 25 based on its 24.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland Workmaster 25.

Estimated Continuous Field Runtime: 5.8 hrs

Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (7.4 gal / 28 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours