Hinomoto Plainsman E150

The Hinomoto Plainsman E150 is a tractor produced by Hinomoto. It is equipped with a 54.07 ci 0.9 L engine. The listed engine power is Diesel (listed): 15 hp / 11.2 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1360 to 1608 pounds.

Engine Power

Diesel (listed): 15 hp / 11.2 kW

Fuel & Capacities

5.5 gal 20.8 L

Transmission

6 forward and 2 reverse

Operating Weight

1360 to 1608 pounds

Overview

	1979 - 1982 E100 SeriesCompact Utility tractor E100 Series Compact Utility tractor

Production
Manufacturer	Hinomoto
Compact Utility tractor
Built in Japan

Hinomoto E150 Engine
Toyosha 0.9L 2-cyl diesel
Fuel tank	5.5 gal 20.8 L
Engine details ...

Hinomoto E150 Transmission
6-speed gear
Transmission details ...

Hinomoto E150 Power
Engine	15 hp 11.2 kW

Mechanical
Two- or four-wheel drive
Open operator station.

Hydraulics
Type	open center
Pump flow	5.2 gpm 19.7 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift	1031 lbs 467 kg

Power Take-off (PTO)
Rear PTO Type	540 (1.375)

Dimensions & Tires
2WD Wheelbase	50.2 inches 127 cm
4WD Wheelbase	51.2 inches 130 cm
Weight	1360 to 1608 pounds
Front tire	4.00-12
2WD Rear tire	7-20
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

E180 & E180D - E150 & E150D published in 1979, by Hinomoto

Engine

Engine Detail — 54.07 ci / 0.9 L Diesel

Manufacturer	Toyosha S-88
Fuel Type	Diesel
Configuration	2-cylinder, liquid-cooled
Displacement	54.07 ci 0.9 L
Bore/Stroke	3.307x3.15 inches 84 x 80 mm
Power	15 hp 11.2 kW
Fuel system	indirect injection
Air cleaner	dry
Pre-heating	glow plugs
Compression	23:1
Rated RPM	2300
Starter	electric
Starter volts	12
Oil capacity	3.4 qts 3.2 L
Coolant capacity	4.2 qts 4.0 L

Transmission

Transmission — 6 forward and 2 reverse gear

Type	gear
Gears	6 forward and 2 reverse
2WD Oil capacity	15.9 qts 15.0 L
4WD Oil capacity	16.9 qts 16.0 L
Three gears, plus reverse, in two ranges.

Dimensions

Hinomoto E150 Tires
2WD Standard tires (ag)	Front: 4.00-12. Rear: 7-20
4WD Standard tires (ag)	Front: 5-12. Rear: 7-20

Dimensions
2WD Wheelbase	50.2 inches 127 cm
4WD Wheelbase	51.2 inches 130 cm
2WD Length	98.4 inches 249 cm
4WD Length	93.9 inches 238 cm
2WD Width	39.8 inches 101 cm
4WD Width	39.2 inches 99 cm
2WD Weight	1360 lbs 616 kg
4WD Weight	1608 lbs 729 kg
2WD Clearance (front axle)	13 inches 33 cm
4WD Clearance (front axle)	9.4 inches 23 cm
2WD Clearance (drawbar)	11.2 inches 28 cm
4WD Clearance (drawbar)	10.8 inches 27 cm
2WD Front tread	30 inches 76 cm
4WD Front tread	31.8 inches 80 cm
Rear tread	32.3 to 35.1 inches 82 to 89 cm

Hinomoto E150 Height
2WD Steering wheel	48.6 inches 123 cm
4WD Steering wheel	49.6 inches 125 cm
2WD Exhaust	70 inches 177 cm
4WD Exhaust	70.7 inches 179 cm

Photos

Hinomoto Plainsman E150 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hinomoto Plainsman E150 based on its 15 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hinomoto Plainsman E150.

Estimated Continuous Field Runtime: 7.1 hrs

Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (5.5 gal / 20.8 L).

Estimated 75% Load Fuel Burn~0.8 gal/hr (3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours