Hinomoto Westerner E180

The Hinomoto Westerner E180 is a tractor produced by Hinomoto. It is equipped with a 65.3 ci 1.1 L engine. The listed engine power is Diesel (listed): 19.7 hp / 14.7 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1623 to 1827 pounds.

Engine Power

Diesel (listed): 19.7 hp / 14.7 kW

Fuel & Capacities

6.5 gal 24.6 L

Transmission

6 forward and 2 reverse

Operating Weight

1623 to 1827 pounds

Overview

	1979 - 1982 E100 SeriesCompact Utility tractor E100 Series Compact Utility tractor

Production
Manufacturer	Hinomoto
Compact Utility tractor
Built in Japan

Hinomoto E180 Engine
Toyosha 1.1L 2-cyl diesel
Fuel tank	6.5 gal 24.6 L
Engine details ...

Hinomoto E180 Transmission
6-speed gear
Transmission details ...

Hinomoto E180 Power
Engine	19.7 hp 14.7 kW

Mechanical
Two- or four-wheel drive
Open operator station.

Hydraulics
Type	open center
Pump flow	5.2 gpm 19.7 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift	1240 lbs 562 kg

Power Take-off (PTO)
Rear PTO Type	540 (1.375)

Dimensions & Tires
2WD Wheelbase	55.1 inches 139 cm
4WD Wheelbase	54.9 inches 139 cm
Weight	1623 to 1827 pounds
Front tire	4.00-12
2WD Rear tire	9.5/9-24
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

E180 & E180D - E150 & E150D published in 1979, by Hinomoto

Engine

Engine Detail — 65.3 ci / 1.1 L Diesel

Manufacturer	Toyosha S-107
Fuel Type	Diesel
Configuration	2-cylinder, liquid-cooled
Displacement	65.3 ci 1.1 L
Bore/Stroke	3.46x3.46 inches 88 x 88 mm
Power	19.7 hp 14.7 kW
Fuel system	indirect injection
Air cleaner	dry
Pre-heating	glow plugs
Compression	23:1
Rated RPM	2400
Starter	electric
Starter volts	12
Oil capacity	3.4 qts 3.2 L
Coolant capacity	4.2 qts 4.0 L

Transmission

Transmission — 6 forward and 2 reverse gear

Type	gear
Gears	6 forward and 2 reverse
2WD Oil capacity	16.9 qts 16.0 L
4WD Oil capacity	17.9 qts 16.9 L
Three gears, plus reverse, in two ranges.

Dimensions

Hinomoto E180 Tires
2WD Standard tires (ag)	Front: 4.00-12. Rear: 9.5/9-24
4WD Standard tires (ag)	Front: 6-14. Rear: 8.3/8-24

Dimensions
2WD Wheelbase	55.1 inches 139 cm
4WD Wheelbase	54.9 inches 139 cm
2WD Length	104.7 inches 265 cm
4WD Length	104.3 inches 264 cm
2WD Width	44.7 inches 113 cm
4WD Width	43.7 inches 110 cm
2WD Weight	1623 lbs 736 kg
4WD Weight	1827 lbs 828 kg
2WD Clearance (front axle)	12.8 inches 32 cm
4WD Clearance (front axle)	11.4 inches 28 cm
2WD Clearance (drawbar)	13 inches 33 cm
4WD Clearance (drawbar)	13.2 inches 33 cm
2WD Front tread	35.8 inches 90 cm
4WD Front tread	38 inches 96 cm
Rear tread	36.2 to 40.15 inches 91 to 101 cm

Hinomoto E180 Height
2WD Steering wheel	50.4 inches 128 cm
4WD Steering wheel	54.3 inches 137 cm
2WD Exhaust	70.5 inches 179 cm
4WD Exhaust	72.8 inches 184 cm

Photos

Hinomoto E180D four-wheel drive tractor.

Recommended Implements & Sizing Guide

Engineering recommendations for Hinomoto Westerner E180 based on its 19.7 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hinomoto Westerner E180.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (6.5 gal / 24.6 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours