Hurlimann H-4105 Elite

The Hurlimann H-4105 Elite is a tractor produced by Hurlimann. It is equipped with a 244.08 ci 4.0 L engine. The listed engine power is Diesel (listed): 103 hp / 76.8 kW. Transmission: 40 forward and reverse. Operating weight: 8,246 lbs 3740 kg.

Engine Power

Diesel (listed): 103 hp / 76.8 kW

Fuel & Capacities

26.4 gal 99.9 L

Transmission

40 forward and reverse

Operating Weight

8,246 lbs 3740 kg

Overview

	1989 - 1995

Production
Manufacturer	Hurlimann

Hurlimann H-4105 Elite Engine
SAME 4.0L 4-cyl diesel
Fuel tank	26.4 gal 99.9 L
Engine details ...

Hurlimann H-4105 Elite Transmission
40-speed
Transmission details ...

Hurlimann H-4105 Elite Power
Engine	103 hp 76.8 kW

Mechanical
Two- or four-wheel drive
Steering	hydrostatic power

Hydraulics
Pump flow	11.2 gpm 42.4 lpm

Tractor hitch
Rear lift	10495 lbs 4760 kg

Power Take-off (PTO)
Rear PTO Type	540, 750, 1000, 1250

Dimensions & Tires
Wheelbase	91.34 inches 232 cm
Weight	8,246 lbs 3740 kg
Front tire	16.9R24
Rear tire	18.4R34
Full dimensions and tires ...

Engine

Engine Detail — 244.08 ci / 4.0 L Diesel

Manufacturer	SAME
Fuel Type	Diesel
Configuration	4-cylinder
Displacement	244.08 ci 4.0 L
Bore/Stroke	4.1338x4.5472 inches 105 x 115 mm
Power	103 hp 76.8 kW
Rated RPM	2500
Torque	265.5 lb-ft 360.0 Nm
Torque RPM	1250

Transmission

Transmission — 40 forward and reverse

Gears

40 forward and reverse

Dimensions

Hurlimann H-4105 Elite Tires
Ag front	16.9R24
Ag rear	18.4R34

Dimensions
Wheelbase	91.34 inches 232 cm
Length	160.63 inches 408 cm
Height	103.15 inches 262 cm
Weight	8,246 lbs 3740 kg

Photos

Hurlimann H-4105 Elite tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Hurlimann H-4105 Elite based on its 103 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hurlimann H-4105 Elite.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).

Estimated 75% Load Fuel Burn~5.4 gal/hr (20.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours