Hurlimann H-478 Prestige

The Hurlimann H-478 Prestige is a tractor produced by Hurlimann. It is equipped with a 244.08 ci 4.0 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: 20 forward and reverse. Drive type: 4x2 2WD. Operating weight: 7805 lbs 3540 kg.

Engine Power

Diesel (listed): 80 hp / 59.7 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

26.4 gal 99.9 L

Transmission

20 forward and reverse

Operating Weight

7805 lbs 3540 kg

Overview

	1989 - 1998

Production
Manufacturer	Hurlimann

Hurlimann H-478 Prestige Engine
SAME 4.0L 4-cyl diesel
Fuel tank	26.4 gal 99.9 L
Engine details ...

Hurlimann H-478 Prestige Transmission
20-speed
Transmission details ...

Hurlimann H-478 Prestige Power
Engine	80 hp 59.7 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD optional
Steering	hydrostatic power

Hydraulics
Pump flow	11.2 gpm 42.4 lpm

Tractor hitch
Rear lift	10495 lbs 4760 kg

Power Take-off (PTO)
Rear PTO Type	540, 750, 1000, 1250

Dimensions & Tires
Wheelbase	91.34 inches 232 cm
Weight	7805 lbs 3540 kg
Front tire	14.9-24
Rear tire	16.9-34
Full dimensions and tires ...

Engine

Engine Detail — 244.08 ci / 4.0 L Diesel

Manufacturer	SAME
Fuel Type	Diesel
Configuration	4-cylinder
Displacement	244.08 ci 4.0 L
Bore/Stroke	4.1338x4.5472 inches 105 x 115 mm
Power	80 hp 59.7 kW
Rated RPM	2500
Torque	210.2 lb-ft 285.0 Nm
Torque RPM	1350

Transmission

Transmission — 20 forward and reverse

Gears

20 forward and reverse

Dimensions

Hurlimann H-478 Prestige Tires
Ag front	14.9-24
Ag rear	16.9-34

Dimensions
Wheelbase	91.34 inches 232 cm
Length	160.63 inches 408 cm
Height	103.94 inches 264 cm
Weight	7805 lbs 3540 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Hurlimann H-478 Prestige based on its 80 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Hurlimann H-478 Prestige.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (26.4 gal / 99.9 L).

Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours