TractorData Logo
TractorData

Ingersoll 4014

The Ingersoll 4014 is a tractor produced by Ingersoll Lawn Tractors. It is equipped with a 512 cc 31.27 ci engine. The listed engine power is Gasoline (gross): 14 hp / 10.4 kW. Transmission: Hy-Drive. Operating weight: 695 lbs 315 kg.

Engine Power
Gasoline (gross): 14 hp / 10.4 kW
Fuel & Capacities
3 gal 11.4 L
Transmission
Hy-Drive
Operating Weight
695 lbs 315 kg

Overview

No photo available
1989 - 1990 4000 SeriesGarden tractor 4000 Series Garden tractor
Production
Manufacturer
Ingersoll
Garden tractor
Ingersoll 4014 Engine
14HP Kohler 512cc 1-cyl gasoline
Engine details ...
Ingersoll 4014 Transmission
hydraulic drive
Transmission details ...
Mechanical
Two-wheel drive
Manual steering
Mechanical band brakes
Open operator station.
Capacity
Fuel
3 gal 11.4 L
Hydraulic system
1.5 gal 5.7 L
Hydraulics
Type
open center
Capacity
1.5 gal 5.7 L
Pressure
2000 psi (transmission) 137.9 bar
575 psi (lift) 39.6 bar
Valves
2
Pump flow
8 gpm 30.3 lpm
Tractor hitch
Rear Type
0 OptOptional
Type
sleeve hitch OptOptional
Power Take-off (PTO)
Front PTO
independent
Clutch
electric
Dimensions & Tires
Wheelbase
48 inches 121 cm
Weight
695 lbs 315 kg
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
flywheel alternator
Charging amps
15
Battery CCA
230
Battery volts
12
Battery AH
32
References
4014 references literature
Compact Tractors 3010, 3012, 3014, 4014 (8-55970) published in 1989

Engine

Engine Detail — 512 cc / 31.27 ci Gasoline

Manufacturer
Kohler M14AQS
Fuel Type
Gasoline
Configuration
1-cylinder, air-cooled horizontal-shaft
Displacement
512 cc 31.27 ci
Bore/Stroke
3.50x3.25 inches 89 x 83 mm
Power (gross)
14 hp 10.4 kW
Compression
7:1
Rated RPM
3600
Starter
electric
Starter volts
12
Sparkplug
Champion RH10
Sparkplug gap
0.035 inches 0.889 mm
Intake valve clearance
0.009 inches (cold) 0.229 mm
Exhaust valve clearance
0.018 inches (cold) 0.457 mm

Transmission

Transmission — Hy-Drive

Transmission
Hy-Drive
Type
hydraulic drive
Gears
infinite forward and reverse
4014 Hy-Drive hydraulic drive speeds

Dimensions

Ingersoll 4014 Tires
Dimensions
Wheelbase
48 inches 121 cm
Length
72 inches 182 cm
Width
41 inches 104 cm
Height (steering wheel)
43.5 inches 110 cm
Height (hood)
38.5 inches 97 cm
Weight
695 lbs 315 kg
Clearance (rear axle)
11 inches 27 cm
Front tread
33.5 inches 85 cm
Rear tread
31.5 inches 80 cm

Attachments

Attachment overview
44" mid-mount mower deck
48" mid-mount mower deck
60" mid-mount mower deck
Snowblower
Blade
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ingersoll Lawn Tractors Ingersoll 4014.

Estimated Continuous Field Runtime: 4.1 hrs

Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (3 gal / 11.4 L).

Estimated 75% Load Fuel Burn~0.7 gal/hr (2.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Ingersoll Lawn Tractors Ingersoll 4014 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Ingersoll Lawn Tractors Ingersoll 4014.

Converted Equivalents:

Horsepower (HP)14 hp
Kilowatts (kW)10.4 kW
Metric Horsepower (PS / CV)14.2 PS

Related models