International Harvester 474

The International Harvester 474 is a tractor produced by International Harvester. It is equipped with a 206 ci 3.4 L engine. The listed engine power is Diesel (listed): 62 hp / 46.2 kW. Transmission: infinite forward and reverse. Operating weight: 5854 lbs 2655 kg.

Engine Power

Diesel (listed): 62 hp / 46.2 kW

Fuel & Capacities

20.3 gal 76.8 L

Transmission

infinite forward and reverse

Operating Weight

5854 lbs 2655 kg

Overview

	1972 - 1974 Utility tractor

Production
Manufacturer	International Harvester
Utility tractor
Built in Doncaster, England

International Harvester 474 Engine
International Harvester 3.4L 4-cyl diesel
Fuel tank	20.3 gal 76.8 L
Engine details ...

International Harvester 474 Power
Engine	62 hp 46.2 kW
PTO (claimed)	49 hp 36.5 kW

Mechanical
Two-wheel drive
Power steering
Wet disc brakes
Open operator station. Cab available.

Hydraulics
Pump flow	11.9 gpm 45.0 lpm

Tractor hitch
Rear Type	II/I
Rear lift	3969 lbs 1800 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	84.5 inches 214 cm
Weight	5854 lbs 2655 kg
Front tire	7.50-16
Rear tire	13.6-36
Full dimensions and tires ...

References

International Tractor Range published in 1973, by International Harvester
Buyer's Guide published in 1976, by International Harvester
454, 474, 574 & 674 Tractors published in 1974, by International Harvester
Full Synchromesh and Hydrostatic Tractor Range published in 1963, by International Harvester

Engine

Engine Detail — 206 ci / 3.4 L Diesel

Manufacturer	International Harvester D-206
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	206 ci 3.4 L
Bore/Stroke	3.875x5.06 inches 98 x 129 mm
Power	62 hp 46.2 kW
Rated RPM	2300 (gear)
	2400 (hydro)
Starter type	electric

Transmission

Transmission options
8-speed synchromesh
hydrostatic

Transmission — 8 forward and 4 reverse synchromesh

Type	synchromesh
Gears	8 forward and 4 reverse

Transmission — infinite forward and reverse hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse

Dimensions

International Harvester 474 Tires
Ag front	7.50-16
Ag rear	13.6-36

Dimensions
Wheelbase	84.5 inches 214 cm
Length	135 inches 342 cm
Height (hood)	57 inches 144 cm
Height (cab)	91 inches 231 cm
Weight	5854 lbs 2655 kg
Front tread	52 to 80 inches 132 to 203 cm
Rear tread	52 to 76 inches 132 to 193 cm

Photos

International Harvester 474

Recommended Implements & Sizing Guide

Engineering recommendations for International Harvester 474 based on its 62 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 474.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (20.3 gal / 76.8 L).

Estimated 75% Load Fuel Burn~3.2 gal/hr (12.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours