International Harvester 4786
The International Harvester 4786 is a tractor produced by International Harvester. It is equipped with a 798 ci 13.1 L engine. The listed engine power is Diesel (listed): 350 hp / 261.0 kW. Transmission: 10 forward and 2 reverse. Operating weight: 30200 lbs 13698 kg.
Overview
![]() | 1978 - 1981
Four-wheel Drive (4WD) tractorSteiger built
Four-wheel Drive (4WD) tractor
Steiger built |
|---|
Production | |
|---|---|
Distributor | International Harvester |
Manufacturer | Steiger |
Four-wheel Drive (4WD) tractor | |
Built in Fargo, North Dakota, USA | |
Original price was $78,700 in 1981 | |
International Harvester 4786 Engine | |
|---|---|
International Harvester 13.1L 8-cyl diesel | |
Fuel tank | 194 gal
734.3 L |
Engine details ... | |
International Harvester 4786 Transmission | |
|---|---|
10-speed gear | |
Transmission details ... |
International Harvester 4786 Power | |
|---|---|
Engine | 350 hp
261.0 kW |
Drawbar (claimed) | 260 hp
193.9 kW |
Drawbar (tested) | 258.20 hp
192.5 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | planetary |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 19 gpm
71.9 lpm |
Total flow | 43 gpm
162.8 lpm |
Steering flow | 24 gpm
90.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | IV OptOptional |
Dimensions & Tires | |
|---|---|
Wheelbase | 118 inches
299 cm |
Weight | 30200 lbs
13698 kg |
Front tire | 24.5-32 |
Rear tire | 24.5-32 |
Full dimensions and tires ... | |
References | |
|---|---|
![]() | |
1979 Buyer's Guide published by International Harvester | |
Buyer's Guide 1981 published by International Harvester | |
Buyer's Guide 1982 published by International Harvester |
Engine
Engine Detail — 798 ci / 13.1 L Diesel
Manufacturer | International Harvester DVT-800 |
Configuration | turbocharged diesel, 8-cylinder, liquid-cooled |
Displacement | 798 ci
13.1 L |
Bore/Stroke | 5.31x4.50 inches
135 x 114 mm |
Power | 350 hp
261.0 kW |
Air cleaner | dry |
Compression | 15.6:1 |
Rated RPM | 2600 |
Idle RPM | 1000-2850 |
Starter volts | 12 |
Transmission
Transmission — 10 forward and 2 reverse gear
Type | gear |
Gears | 10 forward and 2 reverse |
Clutch | dry disc |
![]() | |
Dimensions
International Harvester 4786 Tires | |
|---|---|
Ag front | 24.5-32 |
Ag rear | 24.5-32 |
Dimensions | |
|---|---|
Wheelbase | 118 inches
299 cm |
Length | 241 inches
612 cm |
Width | 117 inches
297 cm |
Operating weight | 30200 lbs*Weight with 23.1-30 duals.
13698 kg |
Front axle | 4 inch diameter
101 mm |
Rear axle | 4 inch diameter
101 mm |
Front tread | 68.1 to 125.1 inches
172 to 317 cm |
Rear tread | 68.1 to 125.1 inches
172 to 317 cm |
International Harvester 4786 Height | |
|---|---|
Hood | 95 inches
241 cm |
Cab | 134 inches
340 cm |
Exhaust | 146 inches
370 cm |
Tests
Nebraska Tractor Test 1317 | |
|---|---|
Diesel 10-speed 4WD
May 23 - 29, 1979
Link: Nebraska Tractor Test 1317 file | |
Drawbar performance | |
Max power | 258.20 hp
192.5 kW |
Fuel use | 20.2 gal/hour
76.5 l/hour |
Gear 3H used for power test. | |
Max pull | 33468 lbs
15181 kg |
Gear 1H used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester 4786 based on its 350 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁 | Commercial / Field Scale | High horsepower articulated/4WD field plowing. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙 | Commercial / Field Scale | Broad-acre grain tillage for high-drawbar tractors. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 4786.
Estimated Continuous Field Runtime: 10.7 hrs
Approximately 10.7 hours of continuous field operation at ~75% rated power on a full tank (194 gal / 734.4 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
International Harvester 4786 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester 4786.
Converted Equivalents:
Direct Competitor Comparison
Compare International Harvester 4786 against same-era industry alternatives in the same horsepower class.
International Harvester 4786
Related models
International Harvester 4300
- Power:
- 300
- Production years:
- 1961 - 1965
International Harvester 4568
- Power:
- 300
- Production years:
- 1975 - 1976
International Harvester 4586
- Power:
- 300
- Production years:
- 1976 - 1981
International Harvester 7588
- Power:
- 300
- Production years:
- 1982 - 1984
International Harvester 7788
- Power:
- 330
- Production years:
- 1982 - 1984








