International Harvester 634
The International Harvester 634 is a tractor produced by International Harvester. It is equipped with a 281 ci 4.6 L engine. The listed engine power is Diesel (listed): 66 hp / 49.2 kW. Transmission: 8 forward and 2 reverse. Drive type: 4x2 2WD. Operating weight: 6546 to 9574 pounds.
Overview
![]() | 1968 - 1972 |
|---|
Production | |
|---|---|
Manufacturer | International Harvester |
Built in Doncaster, England | |
Total built | 3,848 |
International Harvester 634 Engine | |
|---|---|
International Harvester 4.6L 4-cyl diesel | |
Fuel tank | 20.4 gal
77.2 L |
Engine details ... | |
International Harvester 634 Transmission | |
|---|---|
8-speed | |
Transmission details ... |
International Harvester 634 Power | |
|---|---|
Engine | 66 hp
49.2 kW |
PTO (claimed) | 59.3 hp
44.2 kW |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
4x4 4WD *Four-wheel drive conversion by County | |
2WD Steering | manual |
4WD Steering | power |
Mechanical disc brakes | |
Open operator station. Cab optional. | |
Hydraulics | |
|---|---|
Pressure | 2500 psi
172.4 bar |
Pump flow | 10.4 gpm
39.4 lpm |
Steering flow | 4.8 gpm
18.2 lpm |
Steering press. | 1500 psi
103.4 bar |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 3360 lbs
1524 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@1458 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 86.8 inches
220 cm |
4WD Wheelbase | 86.8 inches
220 cm |
AWD Wheelbase | 75 inches
190 cm |
Weight | 6546 to 9574 pounds |
Front tire | 7.50-16 |
2WD Rear tire | 11-38 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Charging system | generator |
Battery volts | 12 |
Battery AH | 95 |
References | |
|---|---|
![]() | |
The Roar of Dust and Diesel - A Story of International Harvester Doncaster by Mike Teanby | |
634 Diesel Tractors published by International Harvester |
Engine
Engine Detail — 281 ci / 4.6 L Diesel
Manufacturer | International Harvester BD-281 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 281 ci
4.6 L |
Bore/Stroke | 4.125x5.25 inches
105 x 133 mm |
Power | 66 hp
49.2 kW |
Rated RPM | 1600 |
Torque | 225 lb-ft
305.1 Nm |
Torque RPM | 1000 |
Starter volts | 12 |
Transmission
Transmission — 8 forward and 2 reverse
Gears | 8 forward and 2 reverse |
Clutch | 330mm dry disc |
Dimensions
International Harvester 634 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.50-16. Rear: 11-38 |
4WD Standard tires (ag) | Front: 10-24. Rear: 12-38 |
AWD Standard tires (ag) | Front: 14-30. Rear: 14-30 |
Dimensions | |
|---|---|
2WD Wheelbase | 86.8 inches
220 cm |
4WD Wheelbase | 86.8 inches
220 cm |
AWD Wheelbase | 75 inches
190 cm |
2WD Length | 138 inches
350 cm |
4WD Length | 139 inches
353 cm |
AWD Length | 150 inches
381 cm |
Width | 65.5 inches
166 cm |
Height (cab) | 96 inches
243 cm |
2WD Front tread | 52 to 61 inches
132 to 154 cm |
4WD Front tread | 53 to 66 inches
134 to 167 cm |
AWD Front tread | 60 to 80 inches
152 to 203 cm |
2WD Rear tread | 56 to 72 inches
142 to 182 cm |
4WD Rear tread | 56 to 72 inches
142 to 182 cm |
AWD Rear tread | 60 to 80 inches
152 to 203 cm |
International Harvester 634 Weight | |
|---|---|
2WD Operating | 6546 lbs
2969 kg |
4WD Operating | 7694 lbs
3489 kg |
AWD Operating | 9574 lbs
4342 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester 634 based on its 66 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester 634.
Estimated Continuous Field Runtime: 5.9 hrs
Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (20.4 gal / 77.2 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
International Harvester 634 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester 634.
Converted Equivalents:
Direct Competitor Comparison
Compare International Harvester 634 against same-era industry alternatives in the same horsepower class.
International Harvester 634
Related models
International Harvester D-514
- Power:
- 53
- Production years:
- 1963 - 1965
International Harvester 485
- Power:
- 53.6
- Production years:
- 1981 - 1985
International Harvester W-400
- Power:
- 53.9
- Production years:
- 1955 - 1956
International Harvester BTD-6
- Power:
- 55
- Production years:
- 1955 - 1975
International Harvester 606
- Power:
- 55.6
- Production years:
- 1962 - 1967


