international harvester 706
 | 1963 - 1967
Standard-tread tractor | 1963 - 1967 | Standard-tread tractor |
|---|---|---|---|
1963 - 1967 | |||
Standard-tread tractor | |||
1963 - 1967 | |
|---|---|
Standard-tread tractor |
Production | |
|---|---|
Manufacturer | International Harvester |
Standard-tread tractor | |
Total built | 4,884 |
Original price was $6,100 in 1967 | |
The 706 was available with a new Torque Amplifier design that prevented free-wheeling when going downhill. An over-center hand clutch was an option, usually found on Wheatland (standard tread) models. The 706 was available with either the Fast Hitch or a standard 3-point hitch. The PTO featured both 540 and 1000 RPM shafts, both of which turned while in use. | |
Variants | |
|---|---|
Farmall 706 | row-crop |
IH 706 | standard-tread |
IH 2706 | industrial |
706 Hi-Clear | high-crop |
International Harvester 706 Engines | |
|---|---|
International Harvester 4.6L 6-cyl diesel | |
International Harvester 5.1L 6-cyl diesel | |
International Harvester 4.3L 6-cyl gasoline | |
Interntional Harvester 4.8L 6-cyl gasoline | |
Engine details ...  |
International Harvester 706 Transmissions | |
|---|---|
8-speed | |
16-speed | |
Transmission details ...  |
International Harvester 706 Power | |
|---|---|
Drawbar (tested) | 67.46 hp
50.3 kW |
PTO (tested) | 76.56 hp
57.1 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
| 4x4 MFWD 4WD (optional) |
Power steering | |
Hydraulic disc brakes | |
Cab optional, A/C available starting in 1966 | |
Photos | |
|---|---|
 | |
International Harvester 706 photos...  |
Capacity | |
|---|---|
Fuel | 33 gal (gas/diesel)
124.9 L |
| 39 gal (LP gas)
147.6 L |
Hydraulic system | 17 gal
64.3 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 17 gal
64.3 L |
Valves | 1 or 2 |
Pump flow | 12 gpm
45.4 lpm |
| 17 gpm (optional)
64.3 lpm |
Total flow | 24 gpm
90.8 lpm |
Steering flow | 9 gpm
34.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Control | torsion bar (optional) |
Type | IH Fast Hitch |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 87.5 inches (2WD)
222 cm |
| 87 inches (4WD)
220 cm |
Weight | 8100 to 9160 pounds |
Front tire | 7.50-18 |
Rear tire | 18.4-30 |
Full dimensions and tires ...  | |
706 Serial Number Location | |
|---|---|
 | |
Tractor's clutch housing on left side |
706 Serial Numbers | |
|---|---|
1963 | 501 (IH) |
1964 | 1251 (IH) |
1965 | 3478 (IH) |
1966 | 4789 (IH) |
1967 | 5316 (IH) |
FAQ: How to read a serial number table. | |
Belt Pulley | |
|---|---|
Diameter | 11 inches
27 cm |
Width | 7.5 inches
19 cm |
RPM | 1055 |
Speed | 3,038 ft/min
925.98 meters/min |
Electrical | |
|---|---|
Ground | negative |
Charging amps | 25 (generator) |
| 32 (alternator) |
Batteries | 1 (gas) |
| 2 (diesel) |
Battery volts | 12 (gas) |
| 6 (diesel) |
References | |
|---|---|
 | |
706-806 Tractors published by International Harvester | |
Operator's Manual McCormick Farmall and International 706 Tractors (1014498R3) published in 1965 |
Recommended Products
Advertisement · Featured Tractor-Related Products
John Deere Original Equipment Green Spray Paint
OEM John Deere Part Number: TY25624 Lead-free formulation - user-friendly and environmentally safe. Suitable for exterior or interior use High-quallity, long-lasting, color-fast paints for weather-proven performance in field testing
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
Heavy Duty Pistol Grip Grease Gun Kit
🚜 Power Performance: 8000psi Max working pressure guaranteed by iron die cast head and enhanced sealing. 🚜 Ergonomic Design: Pistol grip lets you operate with one hand. Sand blasted grid surface increases friction for safety.
* This page contains affiliate links, purchases may generate revenue for this site