Iseki SX95
The Iseki SX95 is a tractor produced by Iseki. It is equipped with a 329.1 ci 5.4 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: Super Shift. Operating weight: 7937 to 9039 pounds.
Engine Power
Diesel (listed): 95 hp / 70.8 kW
Fuel & Capacities
30.4 gal
115.1 L
Transmission
Super Shift
Operating Weight
7937 to 9039 pounds
Overview
 | 1985 - 1990
SX SeriesUtility tractor
SX Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Utility tractor | |
Built in Japan | |
Iseki SX95 Engine | |
|---|---|
Isuzu 5.4L 6-cyl diesel | |
ROPS Fuel tank | 30.4 gal
115.1 L |
Cab Fuel tank | 35.7 gal
135.1 L |
Engine details ...  | |
Iseki SX95 Power | |
|---|---|
Engine | 95 hp
70.8 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Wet disc brakes | |
Four-post ROPS. Cab optional with air-conditioning. |
Hydraulics | |
|---|---|
Pump flow | 13.2 gpm
50.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 6834 lbs
3099 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@1789 |
1000@2000 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 98.6 inches
250 cm |
4WD Wheelbase | 99.4 inches
252 cm |
Weight | 7937 to 9039 pounds |
Front tire | 10.00-16 |
2WD Rear tire | 18.4-34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Battery AH | 170 |
References | |
|---|---|
 | |
SX95 2WD & 4WD Tractors published in 1989, by Iseki |
Engine
Engine Detail — 329.1 ci / 5.4 L Diesel
Manufacturer | Isuzu 6BB1 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 329.1 ci
5.4 L |
Bore/Stroke | 4.016x4.331 inches
102 x 110 mm |
Power | 95 hp
70.8 kW |
Fuel system | direct injection |
Air cleaner | dual dry element |
Pre-heating | glow plugs |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed syncromesh | |
24-speed |
Transmission — 12 forward and 4 reverse syncromesh
Type | syncromesh |
Gears | 12 forward and 4 reverse |
Clutch | 330.2mm dry disc |
 | |
Transmission — Super Shift
Transmission | Super Shift |
Gears | 24 forward and 8 reverse |
Dimensions
Iseki SX95 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 10.00-16. Rear: 18.4-34 |
4WD Standard tires (ag) | Front: 12.4-24. Rear: 18.4-34 |
Dimensions | |
|---|---|
2WD Wheelbase | 98.6 inches
250 cm |
4WD Wheelbase | 99.4 inches
252 cm |
Length | 167.9 inches
426 cm |
Height (exhaust) | 105.1 inches
266 cm |
Ground clearance | 16.7 inches
42 cm |
2WD Front tread | 55.9 to 75.6 inches
141 to 192 cm |
4WD Front tread | 57.5 to 78 inches
146 to 198 cm |
Rear tread | 55.5 to 85.8 inches
140 to 217 cm |
Iseki SX95 Weight | |
|---|---|
2WD ROPS | 7937 lbs
3600 kg |
2WD Cab | 8598 lbs
3900 kg |
4WD ROPS | 8532 lbs
3870 kg |
4WD Cab | 9039 lbs
4100 kg |
Photos
Iseki SX95 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki SX95 based on its 95 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki SX95.
Estimated Continuous Field Runtime: 6.2 hrs
Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (30.4 gal / 115.1 L).
Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki SX95 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki SX95.
Converted Equivalents:
Horsepower (HP)95 hp
Kilowatts (kW)70.8 kW
Metric Horsepower (PS / CV)96.3 PS
Direct Competitor Comparison
Compare Iseki SX95 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki SX95
Engine Power:Diesel (listed): 95 hp / 70.8 kW
★ Baseline Reference
Related models
Iseki T8020
- Power:
- 78.4
- Production years:
- 1990 - 1995
Iseki SX85
- Power:
- 80
- Production years:
- 1985 - 1990
Iseki T8010
- Power:
- 80
- Production years:
- 1985 - 1990
Iseki TJ85
- Power:
- 83.8
- Production years:
- 2007 - 2009
Iseki T9000
- Power:
- 88.8
- Production years:
- 1982 - 1987