Iseki TG6675
The Iseki TG6675 is a tractor produced by Iseki. It is equipped with a 135.2 ci 2.2 L engine. The listed engine power is Diesel (gross): 65 hp / 48.5 kW. Transmission: 12 forward and reverse. Operating weight: 4255 to 4608 pounds.
Engine Power
Diesel (gross): 65 hp / 48.5 kW
Fuel & Capacities
14 gal
53.0 L
Transmission
12 forward and reverse
Operating Weight
4255 to 4608 pounds
Overview
![]() | 2019 -
TG6 Series |
|---|---|
2019 - | |
TG6 Series | |
Production | |
|---|---|
Manufacturer | Iseki |
Iseki TG6675 Engine | |
|---|---|
Shibaura 2.2L 4-cyl diesel | |
Fuel tank | 14 gal
53.0 L |
Engine details ... | |
Iseki TG6675 Power | |
|---|---|
Engine (gross) | 65 hp
48.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post ROPS. Cab available with air-conditioning. | |
Hydraulics | |
|---|---|
Valves | 2 |
Pump flow | 18.7 gpm
70.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Rear lift (at ends) | 3483 lbs
1579 kg |
Rear lift (at 24"/610mm) | 3086 lbs
1399 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/750 |
Mid PTO | independent |
Mid PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 78 inches
198 cm |
Weight | 4255 to 4608 pounds |
Front tire | 9.5-16 |
Rear tire | 13.6-28 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
TG6675 & TG6495 HST published in 2018, by Iseki | |
TG6675 PS published in 2019, by Iseki |
Engine
Engine Detail — 135.2 ci / 2.2 L Diesel
Manufacturer | Shibaura N4LDI-TA |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 135.2 ci
2.2 L |
Bore/Stroke | 3.307x3.937 inches
84 x 100 mm |
Power (gross) | 65 hp
48.5 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
hydrostatic | |
12-speed power shuttle |
Transmission — infinite forward and reverse (6-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (6-range) |
Transmission — 12 forward and reverse power shuttle
Type | power shuttle |
Gears | 12 forward and reverse |
Dimensions
Iseki TG6675 Tires | |
|---|---|
Ag front | 9.5-16 |
Ag rear | 13.6-28 |
Dimensions | |
|---|---|
Wheelbase | 78 inches
198 cm |
Length | 135.2 inches
343 cm |
Width | 67.9 inches
172 cm |
Height (ROPS) | 104 inches
264 cm |
Height (cab) | 92.1 inches
233 cm |
ROPS Weight | 4255 lbs
1930 kg |
Cab Weight | 4608 lbs
2090 kg |
Ground clearance | 10 inches
25 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TG6675 based on its 65 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TG6675.
Estimated Continuous Field Runtime: 4.1 hrs
Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (14 gal / 53 L).
Estimated 75% Load Fuel Burn~3.4 gal/hr (12.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TG6675 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TG6675.
Converted Equivalents:
Horsepower (HP)65 hp
Kilowatts (kW)48.5 kW
Metric Horsepower (PS / CV)65.9 PS
Direct Competitor Comparison
Compare Iseki TG6675 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TG6675
Engine Power:Diesel (gross): 65 hp / 48.5 kW
★ Baseline Reference
Related models
Iseki TA550
- Power:
- 52.3
- Production years:
- 1993 - 1999
Iseki AT5520
- Power:
- 52.9
- Production years:
- 2013 - 2023
Iseki TR55
- Power:
- 54.2
- Production years:
- 1996 - 2000
Iseki TJ55
- Power:
- 54.3
- Production years:
- 2004 - 2009
Iseki TG553
- Power:
- 55
- Production years:
- 1994 - 2004


