Iseki TS1610
The Iseki TS1610 is a tractor produced by Iseki. It is equipped with a 59.5 ci 1.0 L engine. The listed engine power is Diesel (listed): 15.8 hp / 11.8 kW. Transmission: 18 forward and 6 reverse. Operating weight: 1653 to 1863 pounds.
Engine Power
Diesel (listed): 15.8 hp / 11.8 kW
Fuel & Capacities
4.2 gal
15.9 L
Transmission
18 forward and 6 reverse
Operating Weight
1653 to 1863 pounds
Overview
 | TS SeriesCompact Utility tractor |
|---|---|
TS Series | |
Compact Utility tractor | |
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TS1610F | 4WD |
Iseki TS1610 Engine | |
|---|---|
Isuzu 1.0L 2-cyl diesel | |
Fuel tank | 4.2 gal
15.9 L |
Engine details ...  | |
Iseki TS1610 Power | |
|---|---|
Engine | 15.8 hp
11.8 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 2300@537 |
2300@711 | |
2300@890 | |
2300@1274 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 52.8 inches
134 cm |
4WD Wheelbase | 54.3 inches
137 cm |
Weight | 1653 to 1863 pounds |
Front tire | 4.00-12 |
2WD Rear tire | 8.3/8-22 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
TS & TX Series published in 1975, by Iseki | |
TS1610G published by Iseki |
Engine
Engine Detail — 59.5 ci / 1.0 L Diesel
Manufacturer | Isuzu 2AA1 |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 59.5 ci
1.0 L |
Bore/Stroke | 3.39x3.31 inches
86 x 84 mm |
Power | 15.8 hp
11.8 kW |
Rated RPM | 2300 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 3.8 qts
3.6 L |
Iseki TS1610 Engine | |
|---|---|
 |
Transmission
Transmission options | |
|---|---|
9-speed gear | |
18-speed creeper |
Transmission — 9 forward and 3 reverse gear
Type | gear |
Gears | 9 forward and 3 reverse |
Three gears (1-3) plus reverse (R) in three ranges. Additional creeper range available on four-wheel drive models. | |
 | |
Transmission | |
Type | creeper |
Gears | 18 forward and 6 reverse |
 | |
Dimensions
Iseki TS1610 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-12. Rear: 8.3/8-22 |
4WD Standard tires (ag) | Front: 6-14. Rear: 8.3/8-22 |
Dimensions | |
|---|---|
2WD Wheelbase | 52.8 inches
134 cm |
4WD Wheelbase | 54.3 inches
137 cm |
2WD Length | 89 inches
226 cm |
4WD Length | 89.4 inches
227 cm |
2WD Width | 42.9 inches
108 cm |
4WD Width | 44.1 inches
112 cm |
2WD Height | 75.2 inches
191 cm |
4WD Height | 76 inches
193 cm |
2WD Weight | 1653 lbs
749 kg |
4WD Weight | 1863 lbs
845 kg |
2WD Ground clearance | 11.4 inches
28 cm |
4WD Ground clearance | 10.2 inches
25 cm |
Front tread | 33.5 to 37.4 inches
85 to 94 cm |
Rear tread | 33.5 to 39.4 inches
85 to 100 cm |
Photos
Iseki TS1610
Iseki TS1610
Iseki TS1610
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TS1610 based on its 15.8 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS1610.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (4.2 gal / 15.9 L).
Estimated 75% Load Fuel Burn~0.8 gal/hr (3.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TS1610 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS1610.
Converted Equivalents:
Horsepower (HP)15.8 hp
Kilowatts (kW)11.8 kW
Metric Horsepower (PS / CV)16 PS
Direct Competitor Comparison
Compare Iseki TS1610 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TS1610
Engine Power:Diesel (listed): 15.8 hp / 11.8 kW
★ Baseline Reference
Related models
Iseki TU130
- Power:
- 12.8
- Production years:
- 1984 - 1986
Iseki TC13
- Power:
- 12.9
Iseki TU135F
- Power:
- 13.5
- Production years:
- 1986 - 1990
Iseki TU137F
- Power:
- 13.5
- Production years:
- 1989 - 1992
Iseki TU140
- Power:
- 13.8
- Production years:
- 1984 - 1986