Iseki TS2810

The Iseki TS2810 is a tractor produced by Iseki. It is equipped with a 89.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 28 hp / 20.9 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2690 to 2976 pounds.

Engine Power
Diesel (listed): 28 hp / 20.9 kW
Fuel & Capacities
7.9 gal 29.9 L
Transmission
9 forward and 3 reverse
Operating Weight
2690 to 2976 pounds

Overview

Iseki TS2810 tractor photo
1976 - 1980 TS SeriesCompact Utility tractor TS Series Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Variants
TS2810F
4WD
Iseki TS2810 Engine
Isuzu 1.5L 3-cyl diesel
Fuel tank
7.9 gal 29.9 L
Engine details ...
Iseki TS2810 Transmission
9-speed gear
Transmission details ...
Iseki TS2810 Power
Engine
28 hp 20.9 kW
Mechanical
Two- or four-wheel drive
Open operator station.
Tractor hitch
Rear Type
I
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
630@2600
773@2600
990@2600
1547@2600
Dimensions & Tires
2WD Wheelbase
68.9 inches 175 cm
4WD Wheelbase
70.1 inches 178 cm
Weight
2690 to 2976 pounds
Front tire
5.00-15
2WD Rear tire
12.4/11-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
TS2810 references literature
TS & TX Series published in 1975, by Iseki
TS1610-TS2810
TS3510-TS2810-TS2510 published in 1976, by Iseki
TS2810 published by Iseki

Engine

Engine Detail — 89.3 ci / 1.5 L Diesel

Manufacturer
Isuzu 3AA1
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
89.3 ci 1.5 L
Power
28 hp 20.9 kW
Rated RPM
2600
Starter
electric
Starter volts
12

Transmission

Transmission — 9 forward and 3 reverse gear

Type
gear
Gears
9 forward and 3 reverse
Three gears (1-3) plus reverse (R) in three ranges. Additional creeper range available on four-wheel drive models.
TS2810  gear speeds

Dimensions

Iseki TS2810 Tires
2WD Standard tires (ag)
Front: 5.00-15. Rear: 12.4/11-24
4WD Standard tires (ag)
Front: 6.00-16. Rear: 12.4/11-24
Dimensions
2WD Wheelbase
68.9 inches 175 cm
4WD Wheelbase
70.1 inches 178 cm
Length
122.1 inches 310 cm
Width
58.3 inches 148 cm
Height
78.4 inches 199 cm
2WD Weight
2690 lbs 1220 kg
4WD Weight
2976 lbs 1349 kg
2WD Ground clearance
14.2 inches 36 cm
4WD Ground clearance
12.6 inches 32 cm
2WD Front tread
42.5 to 58.3 inches 107 to 148 cm
4WD Front tread
44.1 inches 112 cm
Rear tread
44.9 to 56.3 inches 114 to 143 cm

Photos

Iseki TS2810 with loader and cab.

Iseki TS2810 with loader and cab.

Iseki TS2810 operator cabin.

Iseki TS2810 operator cabin.

Iseki TS2810 engine.

Iseki TS2810 engine.

Recommended Implements & Sizing Guide

Engineering recommendations for Iseki TS2810 based on its 28 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS2810.

Estimated Continuous Field Runtime: 5.4 hrs

Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).

Estimated 75% Load Fuel Burn~1.5 gal/hr (5.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TS2810 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS2810.

Converted Equivalents:

Horsepower (HP)28 hp
Kilowatts (kW)20.9 kW
Metric Horsepower (PS / CV)28.4 PS

Direct Competitor Comparison

Compare Iseki TS2810 against same-era industry alternatives in the same horsepower class.

Current Model
Iseki

Iseki TS2810

Engine Power:Diesel (listed): 28 hp / 20.9 kW
★ Baseline Reference
DeereMarket Competitor

Deere 1026R

Engine Power:25.2
Production Years:2011 - 2012
KubotaMarket Competitor

Kubota B2601

Engine Power:25.5
Production Years:2018 - 2026
FordMarket Competitor

Ford 1600

Engine Power:25.6
Production Years:1976 - 1979
ZetorMarket Competitor

Zetor M25

Engine Power:25.3
Production Years:2020 - 2026