Iseki TU155
The Iseki TU155 is a tractor produced by Iseki. It is equipped with a 54.9 ci 0.9 L engine. The listed engine power is Diesel (listed): 15.3 hp / 11.4 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1378 to 1466 pounds.
Engine Power
Diesel (listed): 15.3 hp / 11.4 kW
Fuel & Capacities
4 gal
15.1 L
Transmission
6 forward and 2 reverse
Operating Weight
1378 to 1466 pounds
Overview
![]() | 1986 - 1990
Landhope TU5 SeriesCompact Utility tractor
Landhope TU5 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TU155F | 4WD |
Iseki TU155 Engine | |
|---|---|
Mitsubishi 0.9L 3-cyl diesel | |
Fuel tank | 4 gal
15.1 L |
Engine details ... | |
Iseki TU155 Transmission | |
|---|---|
6-speed gear | |
Transmission details ... |
Iseki TU155 Power | |
|---|---|
Engine | 15.3 hp
11.4 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 541@2500 |
735@2500 | |
1138@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 49.6 inches
125 cm |
Weight | 1378 to 1466 pounds |
Front tire | 4.00-12 |
2WD Rear tire | 8-18 |
Full dimensions and tires ... | |
References | |
|---|---|
![]() | |
Landhope 145 155 165 175 published by Iseki | |
Landhope 145 155 165 175 (1575-913-001-3D) |
Engine
Engine Detail — 54.9 ci / 0.9 L Diesel
Manufacturer | Mitsubishi K3C |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 54.9 ci
0.9 L |
Bore/Stroke | 2.76x3.07 inches
70 x 78 mm |
Power | 15.3 hp
11.4 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 1 |
Transmission
Transmission — 6 forward and 2 reverse gear
Type | gear |
Gears | 6 forward and 2 reverse |
![]() | |
Dimensions
Iseki TU155 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-12. Rear: 8-18 |
4WD Standard tires (ag) | Front: 5.00-12. Rear: 8-18 |
Dimensions | |
|---|---|
Wheelbase | 49.6 inches
125 cm |
Length | 86.6 inches
219 cm |
Width | 40.9 inches
103 cm |
Height | 52 inches
132 cm |
2WD Ground clearance | 11 inches
27 cm |
4WD Ground clearance | 9.8 inches
24 cm |
2WD Front tread | 29.9 to 31.5 inches
75 to 80 cm |
4WD Front tread | 32.7 inches
83 cm |
Rear tread | 31.5 to 35.8 inches
80 to 90 cm |
Iseki TU155 Weight | |
|---|---|
2WD | 1378 lbs
625 kg |
4WD | 1466 lbs
664 kg |
Max capacity | 3300 lbs
1496 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TU155 based on its 15.3 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TU155.
Estimated Continuous Field Runtime: 5 hrs
Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (4 gal / 15.1 L).
Estimated 75% Load Fuel Burn~0.8 gal/hr (3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TU155 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TU155.
Converted Equivalents:
Horsepower (HP)15.3 hp
Kilowatts (kW)11.4 kW
Metric Horsepower (PS / CV)15.5 PS
Direct Competitor Comparison
Compare Iseki TU155 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TU155
Engine Power:Diesel (listed): 15.3 hp / 11.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester D-214
Engine Power:14
Production Years:1958 - 1962
Related models
Iseki TU125F
- Power:
- 12.5
- Production years:
- 1986 - 1990
Iseki TU127F
- Power:
- 12.5
- Production years:
- 1989 - 1992
Iseki TU130
- Power:
- 12.8
- Production years:
- 1984 - 1986
Iseki TC13
- Power:
- 12.9
Iseki TU135F
- Power:
- 13.5
- Production years:
- 1986 - 1990







