Iseki TX1300
The Iseki TX1300 is a tractor produced by Iseki. It is equipped with a 40.8 ci 0.7 L engine. The listed engine power is Diesel (gross): 15 hp / 11.2 kW. Transmission: 6 forward and 2 reverse. Operating weight: 1067 to 1124 pounds.
Engine Power
Diesel (gross): 15 hp / 11.2 kW
Fuel & Capacities
3.2 gal
12.1 L
Transmission
6 forward and 2 reverse
Operating Weight
1067 to 1124 pounds
Overview
 | 1978 - 1981
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TX1300F | 4WD |
G152 | similar Bolens model |
G154 | similar Bolens model |
Iseki TX1300 Engine | |
|---|---|
Mitsubishi 0.7L 2-cyl diesel | |
Fuel tank | 3.2 gal
12.1 L |
Engine details ...  | |
Iseki TX1300 Transmission | |
|---|---|
6-speed | |
Transmission details ...  |
Iseki TX1300 Power | |
|---|---|
Engine (gross) | 15 hp
11.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Manual steering | |
Drum brakes | |
Open operator station. |
Hydraulics | |
|---|---|
Pressure | 1707 psi
117.7 bar |
Total flow | 2.7 gpm
10.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | JIS-0 |
Rear lift (at ends) | 838 lbs
380 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 472@2700 |
752@2700 | |
1177@2700 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 48 inches
121 cm |
Weight | 1067 to 1124 pounds |
Front tire | 4.50-10 |
2WD Rear tire | 8-16 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 35 |
Battery volts | 12 |
Battery AH | 45 |
References | |
|---|---|
 | |
TS & TX Series published in 1975, by Iseki |
Engine
Engine Detail — 40.8 ci / 0.7 L Diesel
Manufacturer | Mitsubishi KE70 |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 40.8 ci
0.7 L |
Bore/Stroke | 2.874x3.15 inches
73 x 80 mm |
Power (gross) | 15 hp
11.2 kW |
Starter type | electric |
Oil capacity | 2.7 qts
2.6 L |
Exhaust valve clearance | 0.014 inches
0.356 mm |
Transmission
Transmission — 6 forward and 2 reverse
Gears | 6 forward and 2 reverse |
Clutch | dry disc |
Oil capacity | 13 qts
12.3 L |
 | |
Dimensions
Iseki TX1300 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.50-10. Rear: 8-16 |
4WD Standard tires (ag) | Front: 5.00x12. Rear: 8-16 |
Dimensions | |
|---|---|
Wheelbase | 48 inches
121 cm |
Length | 75.6 inches
192 cm |
Width | 38.6 inches
98 cm |
Height (steering wheel) | 47.2 inches
119 cm |
2WD Weight | 1067 lbs
483 kg |
4WD Weight | 1124 lbs
509 kg |
Ground clearance | 10.6 inches
26 cm |
Photos
Iseki TX1300
Iseki TX1300F with front-end loader and backhoe.
Iseki TX1300F with front-end loader and backhoe.
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TX1300 based on its 15 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TX1300.
Estimated Continuous Field Runtime: 4.1 hrs
Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (3.2 gal / 12.1 L).
Estimated 75% Load Fuel Burn~0.8 gal/hr (3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TX1300 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TX1300.
Converted Equivalents:
Horsepower (HP)15 hp
Kilowatts (kW)11.2 kW
Metric Horsepower (PS / CV)15.2 PS
Direct Competitor Comparison
Compare Iseki TX1300 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TX1300
Engine Power:Diesel (gross): 15 hp / 11.2 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester D-214
Engine Power:14
Production Years:1958 - 1962
Related models
Iseki TX1210
- Power:
- 12
- Production years:
- 1978 - 1981
Iseki TU125F
- Power:
- 12.5
- Production years:
- 1986 - 1990
Iseki TU127F
- Power:
- 12.5
- Production years:
- 1989 - 1992
Iseki TU130
- Power:
- 12.8
- Production years:
- 1984 - 1986
Iseki TC13
- Power:
- 12.9