J.I. Case 810
The J.I. Case 810 is a tractor produced by J I Case. It is equipped with a 277 ci 4.5 L engine. The listed engine power is Diesel (gross): 80 hp / 59.7 kW. Transmission: Terramatic. Drive type: crawler. Operating weight: 15000 lbs 6804 kg.
Engine Power
Diesel (gross): 80 hp / 59.7 kW
Drive & Traction
crawler
Fuel & Capacities
Gasoline
Transmission
Terramatic
Operating Weight
15000 lbs
6804 kg
Overview
 | 1958 - 1964
Agricultural Crawler tractor |
|---|
Production | |
|---|---|
Manufacturer | J.I. Case |
Agricultural Crawler tractor | |
Built in Churubusco, Indiana, USA | |
Variants | |
|---|---|
800 | industrial crawler |
810 | ag crawler |
J.I. Case 810 Transmission | |
|---|---|
4-speed power shift | |
Transmission details ...  |
J.I. Case 810 Power | |
|---|---|
Engine (gross) | 80 hp
59.7 kW |
Plows | 5 |
Drawbar (tested) | 38.57 hp
28.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Drive | crawler |
Hydraulic disc brakes | |
Open operator station. | |
Hydraulics | |
|---|---|
Pump flow | 30 gpm
113.6 lpm |
Dimensions & Tracks | |
|---|---|
Wheelbase | 73 inches
185 cm |
Weight | 15000 lbs
6804 kg |
15-inch tracks | |
Full dimensions and tracks ...  | |
References | |
|---|---|
 | |
810 Agricultural Crawler published in 1960, by J.I. Case | |
Case Agricultural Crawlers published in 1959, by J.I. Case | |
Case Tool Bar Dozer published in 1958, by J.I. Case | |
J.I. Case presents published in 1957 |
Engine
Engine options | |
|---|---|
Continental 4.5L 4-cyl diesel | |
Continental 4.5L 4-cyl gasoline |
Engine Detail — 277 ci / 4.5 L Diesel
Manufacturer | Continental HD-277 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 277 ci
4.5 L |
Bore/Stroke | 4.00x5.50 inches
102 x 140 mm |
Power (gross) | 80 hp
59.7 kW |
Air cleaner | oil bath |
Compression | 15:1 |
Rated RPM | 2250 |
Torque | 204 lb-ft
276.6 Nm |
Torque RPM | 1200 |
Starter | electric |
Starter volts | 24 |
Engine Detail — 277 ci / 4.5 L Gasoline
Manufacturer | Continental |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 277 ci
4.5 L |
Bore/Stroke | 4.00x5.50 inches
102 x 140 mm |
Compression | 7:1 |
Rated RPM | 2250 |
Transmission
Transmission — Terramatic
Transmission | Terramatic |
Type | power shift |
Gears | 4 forward and reverse |
Clutch | hydraulic disc |
 | |
Dimensions
J.I. Case 810 Tracks | |
|---|---|
Width | 15 inches
38 cm |
Dimensions | |
|---|---|
Wheelbase | 73 inches
185 cm |
Length | 139.8 inches
355 cm |
Width | 69 inches
175 cm |
Height (steering wheel) | 71.5 inches
181 cm |
Operating weight | 15000 lbs
6804 kg |
Gauge | 54 inches
137 cm |
Tests
Nebraska Tractor Test 713 | |
|---|---|
Diesel 4-speed crawler
August 14 - 28, 1959
Link: Nebraska Tractor Test 713 file | |
Drawbar performance | |
Max power | 38.57 hp
28.8 kW |
Fuel use | 4.6 gal/hour
17.4 l/hour |
Gear 2 used for power test. | |
Max pull | 14095 lbs
6393 kg |
Gear 1 used for pull test. | |
Recommended Implements & Sizing Guide
Engineering recommendations for J I Case J.I. Case 810 based on its 80 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for J I Case J.I. Case 810.
Estimated Continuous Field Runtime: 1.1 hrs
Approximately 1.1 hours of continuous field operation at ~75% rated power on a full tank (4.6 gal / 17.4 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
J I Case J.I. Case 810 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for J I Case J.I. Case 810.
Converted Equivalents:
Horsepower (HP)80 hp
Kilowatts (kW)59.7 kW
Metric Horsepower (PS / CV)81.1 PS
Direct Competitor Comparison
Compare J.I. Case 810 against same-era industry alternatives in the same horsepower class.
Current Model
J I Case
J.I. Case 810
Engine Power:Diesel (gross): 80 hp / 59.7 kW
★ Baseline Reference
Related models
J.I. Case 741
- Power:
- 64.3
- Production years:
- 1960 - 1969
J.I. Case LA
- Power:
- 64.4
- Production years:
- 1940 - 1953
J.I. Case 1390
- Power:
- 66.7
- Production years:
- 1980 - 1983
J.I. Case 30-60
- Power:
- 66.7
- Production years:
- 1912 - 1916
J.I. Case 830
- Power:
- 73.3
- Production years:
- 1960 - 1969