JCB Fastrac 1115S

The JCB Fastrac 1115S is a tractor produced by Jcb. It is equipped with a 365.2 ci 6.0 L engine. The listed engine power is Diesel (listed): 130 hp / 96.9 kW. Transmission: 36 forward and 12 reverse. Drive type: 4x4 4WD. Operating weight: 12897 lbs*Tractor with 480/70R28 tires and front hitch and PTO. 5850 kg.

Engine Power

Diesel (listed): 130 hp / 96.9 kW

Drive & Traction

4x4 4WD

Fuel & Capacities

58.1 gal 219.9 L

Transmission

36 forward and 12 reverse

Operating Weight

12897 lbs*Tractor with 480/70R28 tires and front hitch and PTO. 5850 kg

Overview

	1996 - 1998 Four-wheel Drive (4WD) tractor

Production
Manufacturer	JCB
Four-wheel Drive (4WD) tractor

JCB Fastrac 1115S Engine
Perkins 6.0L 6-cyl diesel
Engine details ...

JCB Fastrac 1115S Transmission
36-speed synchromesh
Transmission details ...

JCB Fastrac 1115S Power
Engine	130 hp 96.9 kW
PTO (claimed)	103 hp 76.8 kW

Mechanical
Drive	4x4 4WD
Steering	hydrostatic power
Pneumatic dry disc brakes
Cab standard with air conditioning.

Capacity
Fuel	58.1 gal 219.9 L
Hydraulic system	19.8 gal 74.9 L

Hydraulics
Capacity	19.8 gal 74.9 L
Pressure	3046 psi 210.0 bar
Valves	2 or 3
Pump flow	19.6 gpm 74.2 lpm
	24.3 gpmOptOptional 92.0 lpm
Total flow	19.6 gpm 74.2 lpm

Tractor hitch
Rear Type	II
	III OptOptional
Rear lift	11574 lbs 5249 kg
Front Hitch	II OptOptional
Front lift	5625 lbs 2551 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1894
	1000@2088
Front PTO	independent
Front PTO Type	540/1000 (1.375)

Dimensions & Tires
Wheelbase	110 inches 279 cm
Weight	12897 lbs 5850 kg
Front tire	480/70R28
Rear tire	480/70R28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	85
Battery volts	12
Battery AH	83

Engine

Engine Detail — 365.2 ci / 6.0 L Diesel

Manufacturer	Perkins 1000-6 HR1
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	365.2 ci 6.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	130 hp 96.9 kW
Rated RPM	2300
Torque	385.8 lb-ft 523.1 Nm
Torque RPM	1400
Starter volts	12

Transmission

Transmission — 36 forward and 12 reverse synchromesh

Type	synchromesh
Gears	36 forward and 12 reverse
Clutch	350mm ceramic disc
Six gears (1-6) in three ranges (low, medium, high) plus reverse range. Two-speed electro-hydraulic power shift.

Dimensions

JCB Fastrac 1115S Tires
Ag front	480/70R28
Ag rear	480/70R28

Dimensions
Wheelbase	110 inches 279 cm
Length	203.1 inches 515 cm
Width	91 inches 231 cm
Height (cab)	110 inches 279 cm
Weight	12897 lbs*Tractor with 480/70R28 tires and front hitch and PTO. 5850 kg
Ground clearance	18 inches 45 cm
Front tread	72 inches 182 cm
Rear tread	72 inches 182 cm

Photos

JCB Fastrac 1115S tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Jcb Fastrac 1115S based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Jcb Fastrac 1115S.

Estimated Continuous Field Runtime: 8.6 hrs

Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (58.1 gal / 219.9 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours