John Deere 3720

The John Deere 3720 is a tractor produced by John Deere. It is equipped with a 91.5 ci 1.5 L engine. The listed engine power is Diesel (listed): 44 hp / 32.8 kW. Transmission: eHydro AutoHST. Operating weight: 1047 lbs 474 kg.

Engine Power
Diesel (listed): 44 hp / 32.8 kW
Fuel & Capacities
13.5 gal 51.1 L
Transmission
eHydro AutoHST
Operating Weight
1047 lbs 474 kg

Overview

John Deere 3720 tractor photo
2005 - 2013 3000 Twenty SeriesCompact Utility tractor 3000 Twenty Series Compact Utility tractor
Production
Manufacturer
John Deere
Compact Utility tractor
Built in Augusta, Georgia, USA
John Deere 3720 Engine
Yanmar 1.5L 3-cyl diesel
Engine details ...
John Deere 3720 Transmission
hydrostatic
Transmission details ...
John Deere 3720 Power
Engine
44 hp 32.8 kW
Mechanical
Four-wheel drive
Steering
power
Wet disc brakes
Two-post foldable ROPS. Cab optional.
Capacity
ROPS Fuel
13.5 gal 51.1 L
Cab Fuel
11.8 gal 44.7 L
Hydraulic system
6.8 gal 25.7 L
Hydraulics
Type
open center
Capacity
6.8 gal 25.7 L
Valves
5
Pump flow
8.6 gpm 32.6 lpm
Total flow
13.9 gpm 52.6 lpm
Tractor hitch
Rear Type
I
Rear lift (at ends)
2,530 lbs 1147 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540
Mid PTO
optional
Mid PTO Type
2100
Dimensions & Tires
Wheelbase
68 inches 172 cm
Weight
2900 to 3570 pounds
Front tire
7-14
Rear tire
11.2-24
Full dimensions and tires ...
Electrical
Ground
negative
ROPS Charging amps
40
Cab Charging amps
75
Battery CCA
500
Battery volts
12
References
3720 references literature
Commercial & Consumer Equipment Purchasing Guide published in 2007, by John Deere
3000 Series published in 2008, by John Deere
3000 Series published in 2009, by John Deere
3000 Twenty Series Compact Tractors published in 2005, by John Deere
3000 Twenty Series Tractors Product Information Handbook published in 2004, by John Deere
TWENTY Series Tractors published in 2010, by John Deere

Engine

Engine Detail — 91.5 ci / 1.5 L Diesel

Manufacturer
Yanmar 3TNV84HT
Configuration
turbocharged diesel, 3-cylinder, liquid-cooled
Displacement
91.5 ci 1.5 L
Bore/Stroke
3.3x3.54 inches 84 x 90 mm
Power
44 hp 32.8 kW
Fuel system
direct injection
Compression
18.5:1
Rated RPM
2600
Torque
101.1 lb-ft 137.1 Nm
Torque RPM
1560
Starter volts
12
Oil capacity
6 qts 5.7 L
Coolant capacity
5.6 qts 5.3 L

Transmission

Transmission — Sauer-Danfoss eHydro

Transmission
Sauer-Danfoss eHydro
Type
hydrostatic
Gears
infinite forward and reverse (3-range)
Controlled by two foot pedals and range shift lever. Tractor must be stopped before shifting ranges. Cruise control standard. SpeedMatch allows maximum speed to be limited. MotionMatch allows acceleration rate to be set. LoadMatch allows engine RPMs to be set, tractor will adjust speed to maintain RPMs.
With 11.2-24 rear tires.
3720 eHydro hydrostatic speeds

Transmission — eHydro AutoHST

Transmission
eHydro AutoHST
Type
hydrostatic
Gears
infinite forward and reverse (3-range)
AutoHST provides an automobile-style control to the eHydro transmission. A single foot pedal controls engine RPMs and transmission speed, with a column-mounted shifter to select forward, neutral, or reverse.
With 11.2-24 rear tires.
3720 eHydro AutoHST hydrostatic speeds

Dimensions

John Deere 3720 Tires
Ag front
7-14
Ag rear
11.2-24
Lawn/turf front
27x8.5-15
Lawn/turf rear
41x14-20
Lawn/turf front
25x10.5LL-15
Lawn/turf rear
41x18LL-16.1
Industrial front
25x8.5-14
Industrial rear
15-19.5
Industrial front
27x8.5-15
Industrial rear
43x16-20
Dimensions
Wheelbase
68 inches 172 cm
Length
120.2 inches 305 cm
Width
52.4 inches*Minimum 133 cm
Height (hood)
57 inches 144 cm
Height (ROPS)
93.3 inches 236 cm
ROPS Weight
2,900 lbs 1315 kg
Cab Weight
3,570 lbs 1619 kg
Clearance (rear axle)
12.2 inches 30 cm
Rear tread
40.6/45.3/48.9/53.1/56.6 inches 103/115/124/134/143 cm

Attachments

Attachment overview
60" mid-mount mower deck
John Deere 300X loader
John Deere 300CX loader
Backhoe
60" Mower deck
Type
mid-mount John Deere
3-blade
Cutting width
60 inches 152 cm
John Deere 47 Backhoe
Backhoe type
John Deere 47 Backhoe
Weight
1047 lbs 474 kg
2-Foot flat digging depth
90 inches 228 cm
Reach from pivot
114 inches 289 cm
Loading height
70 inches 177 cm
Bucket Rotation
180°
Swing Arc
180°
Bucket force
2840 lbs 1288 kg
Dipperstick force
2005 lbs 909 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 3720 based on its 44 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 3720.

Estimated Continuous Field Runtime: 5.9 hrs

Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (13.5 gal / 51.1 L).

Estimated 75% Load Fuel Burn~2.3 gal/hr (8.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 3720 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 3720.

Converted Equivalents:

Horsepower (HP)44 hp
Kilowatts (kW)32.8 kW
Metric Horsepower (PS / CV)44.6 PS

Direct Competitor Comparison

Compare John Deere 3720 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 3720

Engine Power:Diesel (listed): 44 hp / 32.8 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1260

Engine Power:40
Production Years:1992 - 2002
International HarvesterMarket Competitor

International Harvester 383

Engine Power:40
Production Years:1982 - 1984
KiotiMarket Competitor

Kioti CK4010

Engine Power:39.6
Production Years:2015 - 2025
BobcatMarket Competitor

Bobcat CT2040

Engine Power:39.6
Production Years:2019 - 2026