John Deere 4410
The John Deere 4410 is a tractor produced by John Deere. It is equipped with a 81.2 ci 1.3 L engine. The listed engine power is Diesel (gross): 34.6 hp / 25.8 kW; Diesel (listed): 1.9 hp / 1.4 kW. Transmission: eHydro. Operating weight: 1517 lbs 688 kg.
Engine Power
Diesel (gross): 34.6 hp / 25.8 kW; Diesel (listed): 1.9 hp / 1.4 kW
Fuel & Capacities
10 gal
37.9 L
Transmission
eHydro
Operating Weight
1517 lbs
688 kg
Overview
 | 2002 - 2004
4000 Ten Compact SeriesCompact Utility tractor
4000 Ten Compact Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Compact Utility tractor | |
Built in Augusta, Georgia, USA | |
John Deere 4410 Engine | |
|---|---|
Yanmar 1.3L 3-cyl diesel | |
Engine details ...  |
John Deere 4410 Power | |
|---|---|
Engine (gross) | 34.6 hp
25.8 kW |
PTO (claimed) | 30 hp (gear)
22.4 kW |
28.5 hp (hydro)
21.3 kW | |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Steering | power |
Wet disc brakes | |
Two-post fixed ROPS. Two-post folding ROPS optional. | |
Capacity | |
|---|---|
Fuel | 10 gal
37.9 L |
Hydraulic system | 6.3 gal (gear)
23.8 L |
6.8 gal (hydro)
25.7 L | |
Front axle | 4.7 qts
4.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 6.3 gal (gear)
23.8 L |
6.8 gal (hydro)
25.7 L | |
Pressure | 2500 psi
172.4 bar |
Valves | 5 |
Pump flow | 8.6 gpm
32.6 lpm |
Total flow | 13.9 gpm
52.6 lpm |
Steering flow | 5.3 gpm
20.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 2,200 lbs
997 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | wet disc |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@2600 |
Mid PTO | independent OptOptional |
Mid PTO Type | 2100 |
Dimensions & Tires | |
|---|---|
Wheelbase | 68 inches
172 cm |
Weight | 2900 lbs
1315 kg |
Front tire | 7.00-14 |
Rear tire | 11.2-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
55 (optional) | |
Battery CCA | 500 |
Battery volts | 12 |
References | |
|---|---|
 | |
Operator's Manual 410 and 420 Loaders (OMC49370) published in 2005 | |
4000 TEN Series 18 To 48 HP published in 2001, by John Deere | |
The New John Deere 4000 TEN Series Tractors published in 2002 | |
4000 TEN Series - The tractor redefined published in 2001, by John Deere | |
4000 TEN Series - Take Command published in 2001, by John Deere | |
4000 TEN Series Product Information Handbook published in 2003, by John Deere | |
Commercial & Consumer Equipment Purchase Guide published in 2005, by John Deere |
Engine
Engine Detail — 81.2 ci / 1.3 L Diesel
Manufacturer | Yanmar 3TNE88 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 81.2 ci
1.3 L |
Bore/Stroke | 3.23x3.31 inches
82 x 84 mm |
Power (gross) | 34.6 hp
25.8 kW |
Air cleaner | dry |
Compression | 18.5:1 |
Rated RPM | 2600 |
Idle RPM | 1000-2810 |
Starter volts | 12 |
Starter power | 1.9 hp
1.4 kW |
Oil capacity | 4.5 qts
4.3 L |
Coolant capacity | 6 qts
5.7 L |
Transmission
Transmission options | |
|---|---|
12-speed power shuttle | |
hydrostatic |
Transmission — ePowrReverser
Transmission | ePowrReverser |
Type | power shuttle |
Gears | 12 forward and reverse |
Oil capacity | 25.2 qts
23.8 L |
Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever. | |
With 11.2-24 rear tires. | |
 | |
Transmission — eHydro
Transmission | eHydro |
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Oil capacity | 27.2 qts
25.7 L |
Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow. | |
With 11.2-24 rear tires. | |
 | |
Dimensions
John Deere 4410 Tires | |
|---|---|
Ag front | 7.00-14 |
Ag rear | 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 68 inches
172 cm |
Length | 117 inches
297 cm |
Width | 50 inches
127 cm |
Ground clearance | 13.4 inches
34 cm |
John Deere 4410 Weight | |
|---|---|
2900 lbs
1315 kg | |
Max Drawbar | 562 lbs
254 kg |
Max front axle | 1588 lbs
720 kg |
Max rear axle | 4410 lbs
2000 kg |
John Deere 4410 Height | |
|---|---|
Hood | 53.3 inches
135 cm |
ROPS | 82.4 inches (fixed)
209 cm |
90 inches (folding)
228 cm | |
Attachments
Attachment overview | |
|---|---|
60" mid-mount mower deck | |
72" mid-mount mower deck | |
Snowblower | |
Blade | |
Front-end loader | |
Backhoe |
John Deere 48 Backhoe | |
|---|---|
Backhoe type | John Deere 48 Backhoe |
Weight | 1517 lbs
688 kg |
Transport height | 81 inches
205 cm |
2-Foot flat digging depth | 102 inches
259 cm |
Reach from pivot | 133 inches
337 cm |
Loading height | 82 inches
208 cm |
Bucket Rotation | 180° |
Swing Arc | 180° |
Bucket force | 3730 lbs
1691 kg |
Dipperstick force | 2435 lbs
1104 kg |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 4410.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 4410 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 4410.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare John Deere 4410 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 4410
Engine Power:Diesel (gross): 34.6 hp / 25.8 kW; Diesel (listed): 1.9 hp / 1.4 kW
★ Baseline Reference
Related models
John Deere 870
- Power:
- 28
- Production years:
- 1989 - 1998
John Deere 3120
- Power:
- 29.5
- Production years:
- 2005 - 2008
John Deere 790
- Power:
- 30
- Production years:
- 2000 - 2007
John Deere 946
- Power:
- 30
- Production years:
- 1996 - 2003
John Deere 3032E
- Power:
- 31
- Production years:
- 2008 - 2023