John Deere 5130M
The John Deere 5130M is a tractor produced by John Deere. It is equipped with a 276 ci 4.5 L engine. The listed engine power is Diesel (listed): 130 hp / 96.9 kW. Transmission: Powr8. Operating weight: 9185 lbs 4166 kg.
Engine Power
Diesel (listed): 130 hp / 96.9 kW
Fuel & Capacities
43.7 gal
165.4 L
Transmission
Powr8
Operating Weight
9185 lbs
4166 kg
Overview
 | 2022 -
5M SeriesUtility tractor |
|---|---|
2022 - | |
5M Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | John Deere |
Utility tractor | |
Built in Pune, India | |
Original price was $110,745 in 2023 | |
John Deere 5130M Engine | |
|---|---|
John Deere 4.5L 4-cyl diesel | |
Fuel tank | 43.7 gal
165.4 L |
Exhaust fluid (DEF) | 3.17 gal
12.0 L |
Engine details ...  | |
John Deere 5130M Power | |
|---|---|
Engine | 130 hp
96.9 kW |
PTO (claimed) | 115 hp
85.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic rear |
Power steering | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Rear valves | 2 or 3 |
Mid valves | 2 or 3 |
Pump flow | 25.6 gpm
96.9 lpm |
SCV flow | 19.3 gpm
73.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Control | position control and lower-link draft sensing |
Rear lift | 6975 lbs
3163 kg |
7868 lbsOptOptional
3568 kg | |
Front Hitch | II/I |
Front lift | 4257 lbs
1930 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540 (1.375) |
540/1000 (1.375)OptOptional | |
Engine RPM | 540@2100 |
540E@1645 | |
1000@2100 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 92.5 inches
234 cm |
Weight | 9185 lbs
4166 kg |
Front tire | 12.4R24 |
Rear tire | 18.4R30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
200 OptOptional | |
Battery volts | 12 |
References | |
|---|---|
 | |
5M Tractors published in 2022, by John Deere |
Engine
Engine Detail — 276 ci / 4.5 L Diesel
Manufacturer | John Deere 4045 EWL |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 276 ci
4.5 L |
Bore/Stroke | 4.19x5.00 inches
106 x 127 mm |
Emissions | Tier IV |
Power | 130 hp
96.9 kW |
Maximum Power | 133.9 hp
99.8 kW |
Rated RPM | 2200 |
Torque | 399 lb-ft
541.0 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed 4-speed power shift | |
32-speed 8-speed power shift |
Transmission — PowrQuad PLUS
Transmission | PowrQuad PLUS |
Type | 4-speed power shift |
Gears | 16 forward and reverse |
Four power shift gears in four ranges. | |
Transmission — Powr8
Transmission | Powr8 |
Type | 8-speed power shift |
Gears | 32 forward and 16 reverse |
Eight power shift gears in three ranges. Four gears in reverse. | |
Dimensions
John Deere 5130M Tires | |
|---|---|
Standard tires (ag) | Front: 12.4R24. Rear: 18.4R30 |
Dimensions | |
|---|---|
Wheelbase | 92.5 inches
234 cm |
Length | 161 inches
408 cm |
Shipping weight | 9185 lbs
4166 kg |
Max Drawbar | 3197 lbs
1450 kg |
Front tread | 51.1 to 78.6 inches
129 to 199 cm |
Rear tread | 53.1 to 90 inches
134 to 228 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 5130M based on its 130 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5130M.
Estimated Continuous Field Runtime: 6.5 hrs
Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (43.7 gal / 165.4 L).
Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 5130M Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 5130M.
Converted Equivalents:
Horsepower (HP)130 hp
Kilowatts (kW)96.9 kW
Metric Horsepower (PS / CV)131.8 PS
Direct Competitor Comparison
Compare John Deere 5130M against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 5130M
Engine Power:Diesel (listed): 130 hp / 96.9 kW
★ Baseline Reference
Related models
John Deere 6410
- Power:
- 104
- Production years:
- 1999 - 2002
John Deere 4025
- Power:
- 104.4
- Production years:
- 1969 - 1972
John Deere 3055
- Power:
- 105
- Production years:
- 1992 - 1993
John Deere 3530
- Power:
- 105
- Production years:
- 1975 - 1980
John Deere 5105M
- Power:
- 105
- Production years:
- 2022 - 2026