John Deere 3530

The John Deere 3530 is a tractor produced by John Deere. It is equipped with a 328.9 ci 5.4 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: Syncro-Range. Operating weight: 12070 lbs 5474 kg.

Engine Power
Diesel (listed): 105 hp / 78.3 kW
Fuel & Capacities
38.3 gal 145.0 L
Transmission
Syncro-Range
Operating Weight
12070 lbs 5474 kg

Overview

John Deere 3530 tractor photo
1975 - 1980 Row-Crop tractor
Production
Manufacturer
John Deere
Row-Crop tractor
Built in Rosario, Argentina
John Deere 3530 Engine
John Deere 5.4L 6-cyl diesel
Engine details ...
John Deere 3530 Transmission
8-speed
Transmission details ...
John Deere 3530 Power
Engine
105 hp 78.3 kW
PTO (claimed)
91.9 hp 68.5 kW
Mechanical
Two-wheel drive
Power steering
Open operator station.
Capacity
Fuel
38.3 gal 145.0 L
Hydraulic system
12.9 gal 48.8 L
Hydraulics
Type
closed center
Capacity
12.9 gal 48.8 L
Tractor hitch
Rear Type
II
Power Take-off (PTO)
Rear PTO
independent
Clutch
hydraulic
Rear PTO Type
540
Dimensions & Tires
Wheelbase
103.5 inches 262 cm
Weight
12070 lbs 5474 kg
Front tire
7.50x16
Rear tire
18.4x34
Full dimensions and tires ...
Electrical
Charging system
alternator
Charging amps
28
Battery volts
12
Battery AH
110
References
3530 references literature
Tractor 3530 published in 1979, by John Deere

Engine

Engine Detail — 328.9 ci / 5.4 L Diesel

Manufacturer
John Deere
Fuel Type
Diesel
Configuration
6-cylinder, liquid-cooled
Displacement
328.9 ci 5.4 L
Bore/Stroke
4.016x4.331 inches 102 x 110 mm
Power
105 hp 78.3 kW
Fuel system
direct injection
Rated RPM
2500
Starter volts
12
Oil capacity
13.75 qts 13.0 L
Coolant capacity
21.1 qts 20.0 L

Transmission

Transmission — Syncro-Range

Transmission
Syncro-Range
Gears
8 forward and 2 reverse
Oil capacity
51.8 qts 49.0 L

Dimensions

John Deere 3530 Tires
Ag front
7.50x16
Ag rear
18.4x34
23.1x26
Dimensions
Wheelbase
103.5 inches 262 cm
Length
162.2 inches 411 cm
Width
89.8 inches*Minimum width 228 cm
Shipping weight
12070 lbs 5474 kg
Ground clearance
26.4 inches 67 cm
John Deere 3530 Height
Steering wheel
81.1 inches 205 cm
Hood
70.5 inches 179 cm
Exhaust
88.2 inches 224 cm

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 3530 based on its 105 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 3530.

Estimated Continuous Field Runtime: 7 hrs

Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (38.3 gal / 145 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 3530 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 3530.

Converted Equivalents:

Horsepower (HP)105 hp
Kilowatts (kW)78.3 kW
Metric Horsepower (PS / CV)106.5 PS

Direct Competitor Comparison

Compare John Deere 3530 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 3530

Engine Power:Diesel (listed): 105 hp / 78.3 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1014

Engine Power:95
Production Years:1978 - 1990
Deutz-FahrMarket Competitor

Deutz-Fahr 4.71

Engine Power:95
Production Years:1990 - 1993
FordMarket Competitor

Ford 5095

Engine Power:95
International HarvesterMarket Competitor

International Harvester 660

Engine Power:95
Production Years:1959 - 1963