John Deere 5725

The John Deere 5725 is a tractor produced by John Deere. It is equipped with a 278 ci 4.6 L engine. The listed engine power is Diesel (listed): 89 hp / 66.4 kW. Transmission: PowrReverser. Operating weight: 5512 to 7130 pounds.

Engine Power
Diesel (listed): 89 hp / 66.4 kW
Fuel & Capacities
25 gal 94.6 L
Transmission
PowrReverser
Operating Weight
5512 to 7130 pounds

Overview

John Deere 5725 tractor photo
2006 - 2012 5025 SeriesUtility tractor 5025 Series Utility tractor
Production
Manufacturer
John Deere
Utility tractor
Built in Saltillo, Mexico
Variants
5725O
orchard
5725HC
high-crop
John Deere 5725 Engine
John Deere 4.6L 4-cyl diesel
OOS Fuel tank
25 gal 94.6 L
IOOS Fuel tank
37 gal 140.0 L
Cab Fuel tank
37 gal 140.0 L
PowrReverser Cab Fuel tank
33 gal 124.9 L
Engine details ...
John Deere 5725 Power
Engine
89 hp 66.4 kW
PTO (claimed)
77 hp 57.4 kW
Mechanical
Two- or four-wheel drive
Power steering
Hydraulic wet disc brakes
Two-post fixed ROPS. Foldable ROPS optional. Optional isolate platform (IOOS). Cab optional with air-conditioning.
Hydraulics
Type
open center
Pressure
2800 psi 193.1 bar
Pump flow
15.9 gpm 60.2 lpm
Steering flow
6.6 gpm 25.0 lpm
Steering press.
1900 psi 131.0 bar
Tractor hitch
Rear Type
II/I
Control
top-link draft sensing
Rear lift (at 24"/610mm)
3374 lbs 1530 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540 (1.375)
Engine RPM
540@2400
540E@1700
Dimensions & Tires
Wheelbase
85.8 inches 217 cm
Weight
5512 to 7130 pounds
Front tire
12.4x24
Rear tire
18.4x30
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
ROPS Charging amps
70
Cab Charging amps
90
Battery CCA
550
Battery volts
12
Battery Group
27F
References
5725 references literature
Tractores Serie 5025 published in 2007, by John Deere

Engine

Engine Detail — 278 ci / 4.6 L Diesel

Manufacturer
John Deere
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
278 ci 4.6 L
Bore/Stroke
4.19x5.00 inches 106 x 127 mm
Emissions
Tier 0
Power
89 hp 66.4 kW
Compression
17.0:1
Rated RPM
2400
Idle RPM
800-2600
Operating RPM
1600-2400
Firing order
1-3-4-2
Starter
electric
Starter volts
12
Oil capacity
9 qts 8.5 L
Coolant capacity
11.4 qts 10.8 L
Intake valve clearance
0.014 inches 0.356 mm
Exhaust valve clearance
0.018 inches 0.457 mm

Transmission

Transmission options
9-speed gear
9-speed partially synchronized
12-speed power shuttle

Transmission — 9 forward and 3 reverse gear

Type
gear
Gears
9 forward and 3 reverse
Clutch
279mm dry disc
Oil capacity
40.2 qts 38.0 L
Three gears (1-3) plus reverse (R) in four ranges (A-C). Tractor must be stopped, and clutch used, to shift gear or range.
With 16.9-30 rear tires.
5725  gear speeds

Transmission — 9 forward and 3 reverse partially synchronized

Type
partially synchronized
Gears
9 forward and 3 reverse
Oil capacity
40.2 qts 38.0 L
Three gears (1-3) plus reverse (R) in four ranges (A-C). Gears are synchronized. Tractor must be stopped, and clutch used, to shift range.
With 16.9-30 rear tires.
5725  partially synchronized speeds

Transmission — PowrReverser

Transmission
PowrReverser
Type
power shuttle
Gears
12 forward and reverse
Clutch
wet disc
Oil capacity
46 qts 43.5 L
Four gears (1-4) in three ranges (A-C) with left-hand power shuttle. Gears are synchronized and can be shifting on the move using the clutch. Tractor must be stopped, and clutch used, to shift range.
With 18.4-30 rear tires. Reverse speeds are 10% faster than forward.
5725 PowrReverser power shuttle speeds

Dimensions

John Deere 5725 Tires
Standard tires (ag)
Front: 12.4x24. Rear: 18.4x30
Dimensions
Wheelbase
85.8 inches 217 cm
OOS Length
140.5 inches 356 cm
IOOS Length
149.5 inches 379 cm
Cab Length
149.5 inches 379 cm
Width
82.6 inches 209 cm
2WD Clearance (front axle)
20 inches 50 cm
4WD Clearance (front axle)
16.5 inches 41 cm
John Deere 5725 Weight
2WD OOS Shipping
5512 lbs 2500 kg
4WD OOS Shipping
5923 lbs 2686 kg
2WD IOOS Shipping
6520 lbs 2957 kg
4WD IOOS Shipping
6647 lbs 3015 kg
2WD Cab Shipping
6711 lbs 3044 kg
4WD Cab Shipping
7130 lbs 3234 kg
John Deere 5725 Height
Steering wheel
77.5 inches 196 cm
OOS Hood
70.2 inches 178 cm
IOOS Hood
67.7 inches 171 cm
OOS ROPS
100 inches 254 cm
IOOS ROPS
102.6 inches 260 cm
Cab
101.7 inches 258 cm

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 5725 based on its 89 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5725.

Estimated Continuous Field Runtime: 5.4 hrs

Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (25 gal / 94.6 L).

Estimated 75% Load Fuel Burn~4.6 gal/hr (17.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

John Deere 5725 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 5725.

Converted Equivalents:

Horsepower (HP)89 hp
Kilowatts (kW)66.4 kW
Metric Horsepower (PS / CV)90.2 PS

Direct Competitor Comparison

Compare John Deere 5725 against same-era industry alternatives in the same horsepower class.

Current Model
John Deere

John Deere 5725

Engine Power:Diesel (listed): 89 hp / 66.4 kW
★ Baseline Reference
FendtMarket Competitor

Fendt 208 Vario

Engine Power:80.5
Production Years:2010 - 2026
Massey FergusonMarket Competitor

Massey Ferguson 2440

Engine Power:80.5
Production Years:2005 - 2007
International HarvesterMarket Competitor

International Harvester 706

Engine Power:80.5
Production Years:1963 - 1967
Deutz-FahrMarket Competitor

Deutz-Fahr DX 4.50

Engine Power:80.5
Production Years:1983 - 1989