John Deere 8300T
The John Deere 8300T is a tractor produced by John Deere. It is equipped with a 496 ci 8.1 L engine. The listed engine power is 204.00 hp 152.1 kW. Transmission: 16 forward and 4 reverse. Drive type: crawler. Operating weight: 23650 to 25010 pounds.
Overview
![]() | 1997 - 1999
8000/8000T SeriesAgricultural Crawler tractor
8000/8000T Series
Agricultural Crawler tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Agricultural Crawler tractor | |
Built in Waterloo, Iowa, USA | |
Variants | |
|---|---|
8300 | wheeled tractor |
8300T | crawler tractor |
John Deere 8300T Engine | |
|---|---|
John Deere 8.1L 6-cyl | |
Engine details ... |
John Deere 8300T Transmission | |
|---|---|
16-speed full power shift | |
Transmission details ... |
John Deere 8300T Power | |
|---|---|
PTO (claimed) | 200 hp
149.1 kW |
Drawbar (tested) | 175.88 hp
131.2 kW |
PTO (tested) | 226.19 hp
168.7 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Drive | crawler |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
CommandView Cab standard | |
Capacity | |
|---|---|
Fuel | 130 gal
492.1 L |
Hydraulic system | 65 gal
246.0 L |
Hydraulics | |
|---|---|
Type | pressure/flow compensated (PFC) |
Capacity | 65 gal
246.0 L |
Pressure | 2900 psi
200.0 bar |
Valves | 3 to 5 |
Pump flow | 30 gpm
113.6 lpm |
38 gpmOptOptional
143.8 lpm | |
Tractor hitch | |
|---|---|
Rear Type | III/IIIN |
Rear lift | 15650 lbs
7098 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Dimensions & Tracks | |
|---|---|
Wheelbase | 89 inches
226 cm |
Weight | 23650 to 25010 pounds |
16-inch tracks | |
Full dimensions and tracks ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 140 |
Batteries | 2 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
8000/8000T Series Tractors Product Information Handbook published in 1998, by John Deere |
Engine
Engine Detail — 496 ci / 8.1 L
Manufacturer | John Deere |
Configuration | turbocharged intercooled, 6-cylinder, liquid-cooled |
Displacement | 496 ci
8.1 L |
Bore/Stroke | 4.56x5.06 inches
116 x 129 mm |
Air cleaner | two paper elements |
Compression | 16.5:1 |
Rated RPM | 2200 |
Starter volts | 12 |
Oil capacity | 22.7 qts
21.5 L |
Coolant capacity | 35.9 qts
34.0 L |
Transmission
Transmission — 16 forward and 4 reverse full power shift
Type | full power shift |
Gears | 16 forward and 4 reverse |
Oil capacity | 260 qts
246.1 L |
![]() | |
Dimensions
John Deere 8300T Tracks | |
|---|---|
Width | 16 inches
40 cm |
Width | 24 inches
60 cm |
Width | 30 inches
76 cm |
Dimensions | |
|---|---|
Wheelbase | 89 inches
226 cm |
Length | 207 inches
525 cm |
219.6 inches (with front weights)
557 cm | |
Width | 103.7 inches (minimum)
263 cm |
Height (cab) | 122.9 inches
312 cm |
Clearance (rear axle) | 21.7 inches
55 cm |
Clearance (drawbar) | 17.7 inches
44 cm |
John Deere 8300T Weight | |
|---|---|
Shipping | 23,650 lbs
10727 kg |
Operating | 25,010 lbs
11344 kg |
Ballasted | 26,525 lbs
12031 kg |
Tests
OCED Tractor Test 1746 | |
|---|---|
Diesel 16-speed crawler
April 9 - May 1, 1998
Link: OCED Tractor Test 1746 file | |
PTO performance | |
Max power | 226.19 hp
168.7 kW |
Fuel use | 12.3 gal/hour
46.6 l/hour |
Power at rated engine speed | 204.00 hp
152.1 kW |
Fuel use | 11.9 gal/hour
45.0 l/hour |
Drawbar performance | |
Max power | 175.88 hp
131.2 kW |
Fuel use | 11.8 gal/hour
44.7 l/hour |
Gear 9 used for power test. | |
Max pull | 27,819 lbs
12618 kg |
Gear 3 used for pull test. | |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 8300T based on its 204 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 8300T.
Estimated Continuous Field Runtime: 12.3 hrs
Approximately 12.3 hours of continuous field operation at ~75% rated power on a full tank (130 gal / 492.1 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
John Deere 8300T Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 8300T.
Converted Equivalents:
Direct Competitor Comparison
Compare John Deere 8300T against same-era industry alternatives in the same horsepower class.
John Deere 8300T
Related models
John Deere 6165J
- Power:
- 165
- Production years:
- 2010 - 2020
John Deere 7430 Premium
- Power:
- 166
- Production years:
- 2007 - 2011
John Deere 4630
- Power:
- 166.7
- Production years:
- 1973 - 1977
John Deere 6170M
- Power:
- 170
- Production years:
- 2013 - 2015
John Deere 6170R
- Power:
- 170
- Production years:
- 2012 - 2014


