Landini Landpower II 135

The Landini Landpower II 135 is a tractor produced by Landini. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 131.4 hp / 98.0 kW. Transmission: Top-Tronic. Operating weight: 13200 lbs 5987 kg.

Engine Power

Diesel (gross): 131.4 hp / 98.0 kW

Fuel & Capacities

68.7 gal 260.0 L

Transmission

Top-Tronic

Operating Weight

13200 lbs 5987 kg

Overview

	2018 - Landpower II SeriesRow-Crop tractor
2018 -
Landpower II Series
Row-Crop tractor

Production
Manufacturer	Landini (a part of Argo)
Row-Crop tractor

Landini Landpower II 135 Engine
FPT 6.7L 6-cyl diesel
Fuel tank	68.7 gal 260.0 L
Engine details ...

Landini Landpower II 135 Power
Engine (gross)	131.4 hp 98.0 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Hydraulic wet disc brakes
Trailer brakes	hydraulic OptOptional
	pneumatic OptOptional
Cab standard with air-conditioning.

Hydraulics
Type	open center
	closed-center load sensing OptOptional
Pump flow	27.7 gpm (open) 104.8 lpm
	39.1 gpm (closed) 148.0 lpm

Tractor hitch
Rear Type	II
Front Hitch	II OptOptional

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000 (1.375)

Dimensions & Tires
Wheelbase	110 inches 279 cm
Weight	13200 lbs 5987 kg
Front tire	420/70R28
Rear tire	520/70R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Landpower II published in 2019, by Landini
Landpower II published in 2023, by Landini

Engine

Engine Detail — 410.6 ci / 6.7 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	410.6 ci 6.7 L
Bore/Stroke	4.09x5.20 inches 104 x 132 mm
Emissions	Stage III
Power (gross)	131.4 hp 98.0 kW
Rated RPM	2200
Torque	435 lb-ft 589.9 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission options
18-speed mechanical shuttle
54-speed three-speed power shift

Transmission — Speed-Six

Transmission	Speed-Six
Type	mechanical shuttle
Gears	18 forward and reverse
Clutch	mechanical dry disc
Six speeds in three ranges with manual shuttle shift. Also available with creeper range that doubles speeds to 36/36.

Transmission — Top-Tronic

Transmission	Top-Tronic
Type	three-speed power shift
Gears	54 forward and 18 reverse
Clutch	electro-hydraulic wet disc
Six speeds in three ranges with three-speed power shift and power shuttle. Also available with creeper range that doubles speeds to 108/36.

Dimensions

Landini Landpower II 135 Tires
Standard tires (ag)	Front: 420/70R28. Rear: 520/70R38

Dimensions
Wheelbase	110 inches 279 cm
Length	210.5 inches 534 cm
Width	56.5 inches 143 cm
Height (cab)	117.5 inches 298 cm
Weight	13200 lbs 5987 kg
Ground clearance	19.5 inches 49 cm

Photos

Landini Landpower II 135 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Landpower II 135 based on its 131.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Landpower II 135.

Estimated Continuous Field Runtime: 10.1 hrs

Approximately 10.1 hours of continuous field operation at ~75% rated power on a full tank (68.7 gal / 260.1 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours