Landini Vision 105

The Landini Vision 105 is a tractor produced by Landini. It is equipped with a 268 ci 4.4 L engine. The listed engine power is Diesel (listed): 98 hp / 73.1 kW. Transmission: Techno. Operating weight: 9,152 lbs 4151 kg.

Engine Power

Diesel (listed): 98 hp / 73.1 kW

Fuel & Capacities

32 gal 121.1 L

Transmission

Techno

Operating Weight

9,152 lbs 4151 kg

Overview

Production
Manufacturer	Landini

Landini Vision 105 Engine
Perkins 4.4L 4-cyl diesel
Engine details ...

Landini Vision 105 Power
Engine	98 hp 73.1 kW
PTO (claimed)	90 hp 67.1 kW

Mechanical
Four-wheel drive

Capacity
Fuel	32 gal 121.1 L
Hydraulic system	14.75 gal 55.8 L

Hydraulics
Capacity	14.75 gal 55.8 L
Valves	3
	5 optional
Pump flow	14.2 gpm 53.7 lpm
Total flow	22.5 gpm 85.2 lpm

Tractor hitch
Rear lift	9,570 lbs 4340 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	95 inches 241 cm
Weight	9,152 lbs 4151 kg
Full dimensions and tires ...

Engine

Engine Detail — 268 ci / 4.4 L Diesel

Manufacturer	Perkins 1104-44T
Configuration	turbo diesel, 4-cylinder
Displacement	268 ci 4.4 L
Power	98 hp 73.1 kW
Torque	268 lb-ft 363.4 Nm

Transmission

Transmission options
15-speed
30-speed
40-speed

Transmission — Techno

Transmission	Techno
Gears	15 forward and reverse

Transmission — Top

Transmission	Top
Gears	30 forward and reverse

Transmission — Techno

Transmission	Techno
Gears	40 forward and reverse

Dimensions

Landini Vision 105 Tires

Dimensions
Wheelbase	95 inches 241 cm
Length	174.5 inches 443 cm
Width	73 inches 185 cm
Height	105.5 inches 267 cm
Weight	9,152 lbs 4151 kg
Ground clearance	16.5 inches 41 cm

Photos

Landini Vision 105 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Vision 105 based on its 98 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Vision 105.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (32 gal / 121.1 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours