Lanz 700
The Lanz 700 is a tractor produced by Lanz. It is equipped with a 165.1 ci 2.7 L engine. The listed engine power is Diesel (listed): 53 hp / 39.5 kW. Transmission: 10 forward and 3 reverse. Operating weight: 4775 lbs 2165 kg.
Engine Power
Diesel (listed): 53 hp / 39.5 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
10 forward and 3 reverse
Operating Weight
4775 lbs
2165 kg
Overview
 | 1962 - 1966
0 Series |
|---|
Production | |
|---|---|
Manufacturer | Lanz (a part of John Deere) |
Built in Mannheim, Baden-Württemberg, Germany | |
Lanz 700 Engine | |
|---|---|
John Deere 2.7L 4-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
Lanz 700 Transmission | |
|---|---|
10-speed constant mesh | |
Transmission details ...  |
Lanz 700 Power | |
|---|---|
Engine | 53 hp
39.5 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Disc brakes | |
Open operator station. |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2200 psi
151.7 bar |
Pump flow | 4.2 gpm
15.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 1764 lbs
800 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Engine RPM | 540@2250 |
1000@2380 | |
Mid PTO | standard |
Mid PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 76.8 inches
195 cm |
Weight | 4775 lbs
2165 kg |
Front tire | 6.00-16 |
Rear tire | 11-32 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
700: Lift even more - lift more safely published by John Deere |
Engine
Engine Detail — 165.1 ci / 2.7 L Diesel
Manufacturer | John Deere |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 165.1 ci
2.7 L |
Bore/Stroke | 3.875x3.50 inches
98 x 89 mm |
Power | 53 hp
39.5 kW |
Rated RPM | 2400 |
Firing order | 1-3-4-2 |
Starter volts | 12 |
Oil capacity | 5.8 qts
5.5 L |
Coolant capacity | 12.15 qts
11.5 L |
Transmission
Transmission — 10 forward and 3 reverse constant mesh
Type | constant mesh |
Gears | 10 forward and 3 reverse |
Oil capacity | 32.8 qts
31.0 L |
Four gears (1-4) in three ranges (I, II, III) plus reverse range. Speeds in fourth gear are the same across all three forward ranges. | |
With 11-32 rear tires. | |
 | |
Dimensions
Lanz 700 Tires | |
|---|---|
Ag front | 6.00-16 |
Ag rear | 11-32 |
Ag rear | 9-32 |
11-28 | |
9-36 | |
13-28 | |
Dimensions | |
|---|---|
Wheelbase | 76.8 inches
195 cm |
Length | 133.5 inches
339 cm |
Width | 65 inches*Minimum
165 cm |
Height (steering wheel) | 62.6 inches
159 cm |
Height (hood) | 54.9 inches
139 cm |
Shipping weight | 4775 lbs
2165 kg |
Front tread | 49.2 to 72.8 inches
124 to 184 cm |
Rear tread | 53.2 to 59.1 inches
135 to 150 cm |
Photos
Lanz 700 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Lanz 700 based on its 53 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Lanz 700.
Estimated Continuous Field Runtime: 6.7 hrs
Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~2.8 gal/hr (10.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Lanz 700 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Lanz 700.
Converted Equivalents:
Horsepower (HP)53 hp
Kilowatts (kW)39.5 kW
Metric Horsepower (PS / CV)53.7 PS
Direct Competitor Comparison
Compare Lanz 700 against same-era industry alternatives in the same horsepower class.
Current Model
Lanz
Lanz 700
Engine Power:Diesel (listed): 53 hp / 39.5 kW
★ Baseline Reference
Related models
Lanz D9500
- Power:
- 44.1
- Production years:
- 1935 - 1955
Lanz D9506
- Power:
- 44.1
- Production years:
- 1935 - 1955
Lanz D9511
- Power:
- 44.1
- Production years:
- 1935 - 1955
Lanz D9531
- Power:
- 44.1
- Production years:
- 1935 - 1955
Lanz D9539
- Power:
- 44.1
- Production years:
- 1935 - 1955