Lanz Bulldog D2416

The Lanz Bulldog D2416 is a tractor produced by Lanz. It is equipped with a 159.6 ci 2.6 L engine. The listed engine power is Diesel (listed): 24 hp / 17.9 kW. Transmission: 6 forward.

Engine Power

Diesel (listed): 24 hp / 17.9 kW

Fuel & Capacities

Diesel

Transmission

6 forward

Overview

	1955 - 1960 Standard-tread tractor

Production
Manufacturer	Lanz
Standard-tread tractor
Built in Mannheim, Baden-Württemberg, Germany

Lanz D2416 Engine
Lanz 2.6L 1-cyl diesel
Engine details ...

Lanz D2416 Transmission
6-speed
Transmission details ...

Lanz D2416 Power
Engine	24 hp 17.9 kW

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Dimensions & Tires
Front tire	5.50-16
Rear tire	8-36
Full dimensions and tires ...

Engine

Engine Detail — 159.6 ci / 2.6 L Diesel

Manufacturer	Lanz
Fuel Type	Diesel
Configuration	1-cylinder, liquid-cooled
Displacement	159.6 ci 2.6 L
Bore/Stroke	5.51x6.69 inches 140 x 170 mm
Power	24 hp 17.9 kW
Rated RPM	1050

Transmission

Transmission — 6 forward

Gears

6 forward

Dimensions

Lanz D2416 Tires
Ag front	5.50-16
Ag rear	8-36
	10-28

Dimensions

Photos

1956 Lanz D2416.

Lanz D2416 with Baas loader

Lanz Bulldog D2416 operator station and controls.

Recommended Implements & Sizing Guide

Engineering recommendations for Lanz Bulldog D2416 based on its 24 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Lanz Bulldog D2416.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours