Lanz Bulldog D2816

The Lanz Bulldog D2816 is a tractor produced by Lanz. It is equipped with a 159.6 ci 2.6 L engine. The listed engine power is Diesel (listed): 28 hp / 20.9 kW. Transmission: 6 forward and 2 reverse.

Engine Power

Diesel (listed): 28 hp / 20.9 kW

Fuel & Capacities

Diesel

Transmission

6 forward and 2 reverse

Overview

	1955 - 1960

Production
Manufacturer	Lanz
Built in Mannheim, Baden-Württemberg, Germany

Lanz D2816 Engine
Lanz 2.6L 1-cyl diesel
Engine details ...

Lanz D2816 Transmission
6-speed gear
Transmission details ...

Lanz D2816 Power
Engine	28 hp 20.9 kW

Mechanical
Two-wheel drive
Manual steering
Open operator station.

Dimensions & Tires
Front tire	5.50-16
Rear tire	8-36
Full dimensions and tires ...

Engine

Engine Detail — 159.6 ci / 2.6 L Diesel

Manufacturer	Lanz
Fuel Type	Diesel
Configuration	1-cylinder, liquid-cooled
Displacement	159.6 ci 2.6 L
Bore/Stroke	5.51x6.69 inches 140 x 170 mm
Power	28 hp 20.9 kW
Rated RPM	1100

Transmission

Transmission — 6 forward and 2 reverse gear

Type	gear
Gears	6 forward and 2 reverse

Dimensions

Lanz D2816 Tires
Ag front	5.50-16
Ag rear	8-36
	11-28

Dimensions

Photos

Lanz Bulldog D2816

Recommended Implements & Sizing Guide

Engineering recommendations for Lanz Bulldog D2816 based on its 28 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Lanz Bulldog D2816.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours