LS MT226E
The LS MT226E is a tractor produced by Ls. It is equipped with a 80.4 ci 1.3 L engine. The listed engine power is Diesel (gross): 24.6 hp / 18.3 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2963 to 3007 pounds.
Engine Power
Diesel (gross): 24.6 hp / 18.3 kW
Fuel & Capacities
10.6 gal
40.1 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
2963 to 3007 pounds
Overview
 | 2024 -
MT2E Series |
|---|---|
2024 - | |
MT2E Series | |
Production | |
|---|---|
Manufacturer | LS |
Variants | |
|---|---|
MT226E | ROPS shuttle |
MT226ED | ROPS shuttle with transmission PTO |
MT226HE | ROPS hydrostatic |
MT226HEC | Cab hydrostatic |
LS MT226E Engine | |
|---|---|
Mitsubishi 1.3L 3-cyl diesel | |
Fuel tank | 10.6 gal
40.1 L |
Engine details ...  | |
LS MT226E Power | |
|---|---|
Engine (gross) | 24.6 hp
18.3 kW |
Shuttle PTO (claimed) | 19.2 hp
14.3 kW |
Hydro PTO (claimed) | 17.1 hp
12.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. |
Hydraulics | |
|---|---|
Type | open center |
Shuttle Pump flow | 7.9 gpm
29.9 lpm |
Hydro Pump flow | 7.1 gpm
26.9 lpm |
Shuttle Total flow | 12.5 gpm
47.3 lpm |
Hydro Total flow | 11.7 gpm
44.3 lpm |
Steering flow | 4.6 gpm
17.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Rear lift (at ends) | 1433 lbs
650 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
transmission *Transmission PTO on the MT226ED only. | |
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 66 inches
167 cm |
Weight | 2963 to 3007 pounds |
Front tire | 7-14 |
Rear tire | 11.2-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 50 |
Batteries | 12 |
Battery volts | 1 |
Engine
Engine Detail — 80.4 ci / 1.3 L Diesel
Manufacturer | Mitsubishi S3L2 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled inline |
Displacement | 80.4 ci
1.3 L |
Bore/Stroke | 3.07x3.62 inches
78 x 92 mm |
Power (gross) | 24.6 hp
18.3 kW |
Fuel system | indirect injection |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed synchro shuttle | |
hydrostatic |
Transmission — 12 forward and reverse synchro shuttle
Type | synchro shuttle |
Gears | 12 forward and reverse |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Dimensions
LS MT226E Tires | |
|---|---|
Standard tires (ag) | Front: 7-14. Rear: 11.2-24 |
Lawn/turf front | 25x8.50-14 |
Lawn/turf rear | 41x14.00-20 |
Industrial front | 27x8.50-15 |
Industrial rear | 43x16.00-20 |
Dimensions | |
|---|---|
Wheelbase | 66 inches
167 cm |
Length | 119 inches
302 cm |
Width | 66 inches
167 cm |
Height (ROPS) | 95 inches
241 cm |
LS MT226E Weight | |
|---|---|
MT226ED | 2963 lbs
1344 kg |
Shuttle | 2985 lbs
1353 kg |
Hydro | 3007 lbs
1363 kg |
Attachments
Attachment overview | |
|---|---|
Front-end loader | |
Backhoe |
LS LB3001 Backhoe | |
|---|---|
Backhoe type | LS LB3001 Backhoe |
Transport height | 81.8 inches
207 cm |
Digging depth | 97.2 inches
246 cm |
Reach from pivot | 127.2 inches
323 cm |
Loading height | 76.2 inches
193 cm |
Bucket Rotation | 180° |
Swing Arc | 160° |
Bucket force | 3663 lbs
1661 kg |
Photos
LS MT226E compact utility tractor.
Recommended Implements & Sizing Guide
Engineering recommendations for Ls MT226E based on its 24.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ls MT226E.
Estimated Continuous Field Runtime: 8.3 hrs
Approximately 8.3 hours of continuous field operation at ~75% rated power on a full tank (10.6 gal / 40.1 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ls MT226E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ls MT226E.
Converted Equivalents:
Horsepower (HP)24.6 hp
Kilowatts (kW)18.3 kW
Metric Horsepower (PS / CV)24.9 PS
Direct Competitor Comparison
Compare LS MT226E against same-era industry alternatives in the same horsepower class.
Current Model
Ls
LS MT226E
Engine Power:Diesel (gross): 24.6 hp / 18.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 10-20
Engine Power:22.2
Production Years:1915 - 1920
McCormick-DeeringMarket Competitor
McCormick-Deering 10-20
Engine Power:22.2
Production Years:1923 - 1939