LS MT357
The LS MT357 is a tractor produced by Ls. It is equipped with a 114.7 ci 1.9 L engine. The rated power output is 57 hp 42.5 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 3869 lbs 1754 kg.
Engine Power
57 hp
42.5 kW
Fuel & Capacities
10.6 gal
40.1 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
3869 lbs
1754 kg
Ls MT357 Serial Number & Year Decoder
Find the exact manufacture year of your tractor by checking your chassis serial number below.
Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.
Overview
![]() | 2020 -
MT3 SeriesCompact Utility tractor |
|---|---|
2020 - | |
MT3 Series | |
Compact Utility tractor | |
Production | |
|---|---|
Manufacturer | LS |
Compact Utility tractor | |
LS MT357 Engine | |
|---|---|
LS 1.9L 3-cyl diesel | |
ROPS Fuel tank | 10.6 gal
40.1 L |
Cab Fuel tank | 12.4 gal
46.9 L |
Engine details ... | |
LS MT357 Power | |
|---|---|
Engine (gross) | 57 hp
42.5 kW |
Hydro PTO (claimed) | 45.6 hp
34.0 kW |
Shuttle PTO (claimed) | 48.4 hp
36.1 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. Cab optional. |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2466 psi
170.0 bar |
Valves | 3 |
Pump flow | 8.2 gpm
31.0 lpm |
ROPS shuttle Total flow | 12.3 gpm
46.6 lpm |
ROPS hydro Total flow | 14.3 gpm
54.1 lpm |
Cab hydro Total flow | 15 gpm
56.8 lpm |
ROPS shuttle Steering flow | 4.1 gpm
15.5 lpm |
ROPS hydro Steering flow | 5.5 gpm
20.8 lpm |
Cab hydro Steering flow | 6.8 gpm
25.7 lpm |
Steering press. | 2062 psi
142.2 bar |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift (at ends) | 2755 lbs
1249 kg |
Rear lift (at 24"/610mm) | 2469 lbs
1119 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Engine RPM | 540@2409 |
Mid PTO | independent OptOptional |
Mid PTO Type | 2000 |
Engine RPM | 2000@2562 |
Dimensions & Tires | |
|---|---|
Wheelbase | 73.2 inches
185 cm |
Weight | 3869 lbs
1754 kg |
Front tire | 9.5-16 |
Rear tire | 13.6-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 90 |
Charging volts | 12 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
MT3 Series published in 2020, by LS |
Engine
Engine Detail — 114.7 ci / 1.9 L Diesel
Manufacturer | LS L3C19-T7 |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 114.7 ci
1.9 L |
Bore/Stroke | 3.465x4.055 inches
88 x 103 mm |
Emissions | Tier IV |
Power (gross) | 57 hp
42.5 kW |
Fuel system | common rail direct injection |
Compression | 17:1 |
Rated RPM | 2600 |
Torque | 138.7 lb-ft
188.1 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
16-speed synchro shuttle | |
hydrostatic |
Transmission — 16 forward and reverse synchro shuttle
Type | synchro shuttle |
Gears | 16 forward and reverse |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
Dimensions
LS MT357 Tires | |
|---|---|
Standard tires (ag) | Front: 9.5-16. Rear: 13.6-24 |
Lawn/turf front | 28x8.5-15 |
Lawn/turf rear | 41x14-20 |
Industrial front | 12-16.5 |
Industrial rear | 17.5L-24 |
Dimensions | |
|---|---|
Wheelbase | 73.2 inches
185 cm |
Length | 133 inches
337 cm |
Width | 62.5 inches
158 cm |
Height (ROPS) | 95 inches
241 cm |
Height (cab) | 90 inches
228 cm |
Weight | 3869 lbs
1754 kg |
Attachments
Attachment overview | |
|---|---|
Front-end loader | |
Backhoe |
LS LB2105 Backhoe | |
|---|---|
Backhoe type | LS LB2105 Backhoe |
Transport height | 83.5 inches
212 cm |
Digging depth | 89.7 inches
227 cm |
Reach from pivot | 125.2 inches
318 cm |
Loading height | 72.4 inches
183 cm |
Bucket Rotation | 180° |
Swing Arc | 180° |
Bucket force | 2679 lbs
1215 kg |


