LS MT7101
The LS MT7101 is a tractor produced by Ls. It is equipped with a 206.7 ci 3.4 L engine. The listed engine power is Diesel (gross): 100.6 hp / 75.0 kW. Transmission: 40 forward and reverse. Operating weight: 7714 lbs 3499 kg.
Engine Power
Diesel (gross): 100.6 hp / 75.0 kW
Fuel & Capacities
30.4 gal
115.1 L
Transmission
40 forward and reverse
Operating Weight
7714 lbs
3499 kg
Overview
 | 2021 -
MT7 SeriesUtility tractor |
|---|---|
2021 - | |
MT7 Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | LS |
Utility tractor | |
LS MT7101 Engine | |
|---|---|
FPT 3.4L 4-cyl diesel | |
Fuel tank | 30.4 gal
115.1 L |
Engine details ...  | |
LS MT7101 Transmission | |
|---|---|
40-speed power shuttle | |
Transmission details ...  |
LS MT7101 Power | |
|---|---|
Engine (gross) | 100.6 hp
75.0 kW |
PTO (claimed) | 85.5 hp
63.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Cab standard with air-conditioning. |
Hydraulics | |
|---|---|
Rear valves | 2 |
Front valves | 3 |
Pump flow | 15.7 gpm
59.4 lpm |
Total flow | 22.2 gpm
84.0 lpm |
Steering flow | 6.5 gpm
24.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 8378 lbs
3800 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/750/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 90 inches
228 cm |
Weight | 7714 lbs
3499 kg |
Front tire | 13.6-24 |
Rear tire | 18.4-34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 206.7 ci / 3.4 L Diesel
Manufacturer | FPT F5G |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 206.7 ci
3.4 L |
Bore/Stroke | 3.898x4.331 inches
99 x 110 mm |
Emissions | Tier IV |
Power (gross) | 100.6 hp
75.0 kW |
Fuel system | common rail direct injection |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 40 forward and reverse power shuttle
Type | power shuttle |
Gears | 40 forward and reverse |
Dimensions
LS MT7101 Tires | |
|---|---|
Standard tires (ag) | Front: 13.6-24. Rear: 18.4-34 |
Industrial front | 340/70R28 |
Industrial rear | 460/75R38 |
Dimensions | |
|---|---|
Wheelbase | 90 inches
228 cm |
Length | 152.2 inches
386 cm |
Width | 78.7 inches
199 cm |
Height (cab) | 105.4 inches
267 cm |
Weight | 7714 lbs
3499 kg |
Photos
LS MT7107, left side.
LS MT7107, right side.
Recommended Implements & Sizing Guide
Engineering recommendations for Ls MT7101 based on its 100.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ls MT7101.
Estimated Continuous Field Runtime: 5.8 hrs
Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (30.4 gal / 115.1 L).
Estimated 75% Load Fuel Burn~5.2 gal/hr (19.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ls MT7101 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ls MT7101.
Converted Equivalents:
Horsepower (HP)100.6 hp
Kilowatts (kW)75 kW
Metric Horsepower (PS / CV)102 PS
Direct Competitor Comparison
Compare LS MT7101 against same-era industry alternatives in the same horsepower class.
Current Model
Ls
LS MT7101
Engine Power:Diesel (gross): 100.6 hp / 75.0 kW
★ Baseline Reference