LS XP7095
The LS XP7095 is a tractor produced by Ls. It is equipped with a 206.7 ci 3.4 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: 40 forward and reverse. Operating weight: 7606 lbs 3450 kg.
Engine Power
Diesel (listed): 95 hp / 70.8 kW
Fuel & Capacities
30.4 gal
115.1 L
Transmission
40 forward and reverse
Operating Weight
7606 lbs
3450 kg
Overview
 | 2016 -
XP SeriesUtility tractor |
|---|---|
2016 - | |
XP Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | LS |
Utility tractor | |
LS XP7095 Engine | |
|---|---|
3.4L 4-cyl diesel | |
Fuel tank | 30.4 gal
115.1 L |
Engine details ...  | |
LS XP7095 Power | |
|---|---|
Engine | 95 hp
70.8 kW |
PTO (claimed) | 80.9 hp
60.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Cab standard. |
Hydraulics | |
|---|---|
Pump flow | 16.1 gpm
60.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position control |
Rear lift | 6173 lbs
2800 kg |
8378 lbsOptOptional
3800 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 90 inches
228 cm |
Weight | 7606 lbs
3450 kg |
Front tire | 12.4-24 |
Rear tire | 16.9-34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 206.7 ci / 3.4 L Diesel
Manufacturer | F5G |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 206.7 ci
3.4 L |
Bore/Stroke | 3.90x4.331 inches
99 x 110 mm |
Emissions | Tier 4 |
Power | 95 hp
70.8 kW |
Fuel system | common rail direct injection |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
12-speed synchro shuttle | |
40-speed power shuttle |
Transmission — 12 forward and reverse synchro shuttle
Type | synchro shuttle |
Gears | 12 forward and reverse |
Transmission — 40 forward and reverse power shuttle
Type | power shuttle |
Gears | 40 forward and reverse |
Dimensions
LS XP7095 Tires | |
|---|---|
Standard tires (ag) | Front: 12.4-24. Rear: 16.9-34 |
Dimensions | |
|---|---|
Wheelbase | 90 inches
228 cm |
Length | 171.3 inches
435 cm |
Width | 77.4 inches
196 cm |
Weight | 7606 lbs
3450 kg |
Clearance (front axle) | 19.8 inches
50 cm |
Photos
LS XP7095 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Ls XP7095 based on its 95 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ls XP7095.
Estimated Continuous Field Runtime: 6.2 hrs
Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (30.4 gal / 115.1 L).
Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ls XP7095 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ls XP7095.
Converted Equivalents:
Horsepower (HP)95 hp
Kilowatts (kW)70.8 kW
Metric Horsepower (PS / CV)96.3 PS
Direct Competitor Comparison
Compare LS XP7095 against same-era industry alternatives in the same horsepower class.
Current Model
Ls
LS XP7095
Engine Power:Diesel (listed): 95 hp / 70.8 kW
★ Baseline Reference