Mahindra mForce 100

The Mahindra mForce 100 is a tractor produced by Mahindra. It is equipped with a 268.6 ci 4.4 L engine. The listed engine power is Diesel (listed): 100.4 hp / 74.9 kW. Transmission: 12 forward and reverse. Operating weight: 8124 lbs 3685 kg.

Engine Power

Diesel (listed): 100.4 hp / 74.9 kW

Fuel & Capacities

33.3 gal 126.0 L

Transmission

12 forward and reverse

Operating Weight

8124 lbs 3685 kg

Overview

	2013 - 2015 mFORCE SeriesUtility tractorTYM built mFORCE Series Utility tractor TYM built

Production
Distributor	Mahindra
Manufacturer	TYM
Utility tractor

Variants
100S	shuttle
100P	power shift

Mahindra mForce 100 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	33.3 gal 126.0 L
Engine details ...

Mahindra mForce 100 Power
Engine	100.4 hp 74.9 kW
PTO (claimed)	88.2 hp 65.8 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	open center
Rear valves	1 to 3
Pump flow	15.6 gpm 59.0 lpm
Steering flow	7.1 gpm 26.9 lpm

Tractor hitch
Rear Type	II
Control	position and draftcontrol
Rear lift	6856 lbs 3109 kg
Rear Arms	telescopic stabilizers

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/750/1000
Engine RPM	540@2220
	750@2208
	1000@2227

Dimensions & Tires
Weight	8124 lbs 3685 kg
Front tire	13.6R24
Rear tire	18.4R34
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	85
Charging volts	12
Battery volts	12
Battery AH	110

Engine

Engine Detail — 268.6 ci / 4.4 L Diesel

Manufacturer	Perkins
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.6 ci 4.4 L
Bore/Stroke	4.13x5.00 inches 105 x 127 mm
Emissions	Tier III
Power	100.4 hp 74.9 kW
Fuel system	direct injection
Compression	18.2:1
Rated RPM	2200
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed power shift
12-speed power shuttle

Transmission — 24 forward and reverse power shift

Type	power shift
Gears	24 forward and reverse

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse

Dimensions

Mahindra mForce 100 Tires
Standard tires (ag)	Front: 13.6R24. Rear: 18.4R34

Dimensions
Length	162 inches 411 cm
Width	84.3 inches 214 cm
Height (cab)	107 inches 271 cm
Weight	8124 lbs 3685 kg

Photos

Mahindra mForce 100 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mahindra mForce 100 based on its 100.4 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mahindra mForce 100.

Estimated Continuous Field Runtime: 6.4 hrs

Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (33.3 gal / 126.1 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours