Mahindra mPower 85

The Mahindra mPower 85 is a tractor produced by Mahindra. It is equipped with a 215.4 ci 3.5 L engine. The listed engine power is Diesel (listed): 83 hp / 61.9 kW. Transmission: 12 forward and reverse. Operating weight: 1594 lbs 723 kg.

Engine Power

Diesel (listed): 83 hp / 61.9 kW

Fuel & Capacities

19.28 gal 73.0 L

Transmission

12 forward and reverse

Operating Weight

1594 lbs 723 kg

Overview

	2013 - 2019 mPower SeriesUtility tractor mPower Series Utility tractor

Production
Manufacturer	Mahindra
Utility tractor
Original price was $36,875 in 2013

Variants
mPower 85	ROPS
mPower 85P	Cab

Mahindra mPower 85 Engine
Mahindra 3.5L 4-cyl diesel
Fuel tank	19.28 gal 73.0 L
Engine details ...

Mahindra mPower 85 Transmission
12-speed synchro shuttle
Transmission details ...

Mahindra mPower 85 Power
Engine	83 hp 61.9 kW
PTO (claimed)	70 hp 52.2 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Wet disc brakes
Two-post foldable ROPS.

Hydraulics
Type	open center
Valves	2 or 3
Pump flow	17 gpm 64.3 lpm
Steering flow	5.2 gpm 19.7 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	5500 lbs 2494 kg
Rear Arms	telescopic lower links

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@2187
	1000@2180

Dimensions & Tires
Weight	7297 lbs 3309 kg
Front tire	12.4x24
Rear tire	18.4x30
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	55
Charging volts	12
Battery volts	12
Battery AH	96

Engine

Engine Detail — 215.4 ci / 3.5 L Diesel

Manufacturer	Mahindra
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	215.4 ci 3.5 L
Emissions	Interim Tier IV
Emission control	diesel oxidation catalyst (DOC)
Power	83 hp 61.9 kW
Fuel system	common rail direct injection
Compression	17.2:1
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse synchro shuttle

Type	synchro shuttle
Gears	12 forward and reverse
Clutch	dry ceremetallic

Dimensions

Mahindra mPower 85 Tires
Ag front	12.4x24
Ag rear	18.4x30
Industrial front	12.5/80x18
Industrial rear	19.5Lx24

Dimensions
Length	162 inches 411 cm
Width	77.3 inches 196 cm
Weight	7297 lbs 3309 kg

Attachments

Attachment overview
Front-end loader
Backhoe

Mahindra 511 Backhoe
Backhoe type	Mahindra 511 Backhoe
Weight	1594 lbs 723 kg
Digging depth	133 inches 337 cm
2-Foot flat digging depth	132 inches 335 cm
8-Foot flat digging depth	119 inches 302 cm
Reach from pivot	173 inches 439 cm
Loading height	96 inches 243 cm
Bucket Rotation	180°
Swing Arc	180°
Bucket force	5676 lbs 2574 kg
Dipperstick force	3056 lbs 1386 kg

Photos

Mahindra mPower 85

Recommended Implements & Sizing Guide

Engineering recommendations for Mahindra mPower 85 based on its 83 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mahindra mPower 85.

Estimated Continuous Field Runtime: 4.5 hrs

Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (19.3 gal / 73 L).

Estimated 75% Load Fuel Burn~4.3 gal/hr (16.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours