New Holland TT75
The New Holland TT75 is a tractor produced by New Holland. It is equipped with a 238.5 ci 3.9 L engine. The listed engine power is Diesel (listed): 74.9 hp / 55.9 kW. Transmission: constant mesh. Operating weight: 5,470 lbs 2481 kg.
Engine Power
Diesel (listed): 74.9 hp / 55.9 kW
Fuel & Capacities
23.5 gal
88.9 L
Transmission
constant mesh
Operating Weight
5,470 lbs
2481 kg
Overview
 | 2002 - 2008
TT SeriesUtility tractor
TT Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Built in India | |
New Holland TT75 Engine | |
|---|---|
Iveco 3.9L 4-cyl diesel | |
Fuel tank | 23.5 gal
88.9 L |
Engine details ...  | |
New Holland TT75 Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
New Holland TT75 Power | |
|---|---|
Engine | 74.9 hp
55.9 kW |
PTO (claimed) | 59 hp
44.0 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | spur gear |
Steering | power |
Wet disc brakes | |
Two-post ROPS. | |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 8.6 gpm
32.6 lpm |
Total flow | 15.6 gpm
59.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Control | position and draft control |
Rear lift | 4751 lbs
2155 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Engine RPM | 540@1967 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 86.2 inches
218 cm |
4WD Wheelbase | 85 inches
215 cm |
Weight | 5,470 lbs
2481 kg |
Front tire | 7.50-16 |
Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 23 |
Battery volts | 12 |
Battery AH | 100 |
Engine
Engine Detail — 238.5 ci / 3.9 L Diesel
Manufacturer | Iveco |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 238.5 ci
3.9 L |
Bore/Stroke | 4.094x4.528 inches
104 x 115 mm |
Power | 74.9 hp
55.9 kW |
Fuel system | direct injection |
Air cleaner | oil bath |
dry OptOptional | |
Rated RPM | 2500 |
Torque | 178.7 lb-ft
242.3 Nm |
Torque RPM | 1500 |
Starter volts | 12 |
Transmission
Transmission — constant mesh
Transmission | constant mesh |
Gears | 8 forward and 2 reverse |
 | |
Dimensions
New Holland TT75 Tires | |
|---|---|
Ag front | 7.50-16 (2WD) |
11.2-24 (4WD) | |
Ag rear | 16.9-30 |
Dimensions | |
|---|---|
2WD Wheelbase | 86.2 inches
218 cm |
4WD Wheelbase | 85 inches
215 cm |
Height | 93.9 inches
238 cm |
Weight | 5,470 lbs
2481 kg |
2WD Ground clearance | 19.7 inches
50 cm |
4WD Ground clearance | 16.1 inches
40 cm |
Photos
New Holland TT75, left side.
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland TT75 based on its 74.9 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TT75.
Estimated Continuous Field Runtime: 6 hrs
Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (23.5 gal / 89 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland TT75 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland TT75.
Converted Equivalents:
Horsepower (HP)74.9 hp
Kilowatts (kW)55.9 kW
Metric Horsepower (PS / CV)75.9 PS
Direct Competitor Comparison
Compare New Holland TT75 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland TT75
Engine Power:Diesel (listed): 74.9 hp / 55.9 kW
★ Baseline Reference
Related models
New Holland 4010
- Power:
- 60
New Holland 4630
- Power:
- 60
- Production years:
- 1994 - 1999
New Holland 4635
- Power:
- 60
- Production years:
- 1996 - 1999
New Holland Boomer 4060
- Power:
- 60
- Production years:
- 2008 - 2011
New Holland L60
- Power:
- 60
- Production years:
- 1996 - 1999