Massey Ferguson 152S

The Massey Ferguson 152S is a tractor produced by Massey Ferguson. It is equipped with a 152.7 ci 2.5 L engine. The listed engine power is Diesel (listed): 47 hp / 35.0 kW. Transmission: 8 forward and 2 reverse. Operating weight: 3867 lbs 1754 kg.

Engine Power

Diesel (listed): 47 hp / 35.0 kW

Fuel & Capacities

12.7 gal 48.1 L

Transmission

8 forward and 2 reverse

Operating Weight

3867 lbs 1754 kg

Overview

	Utility tractor	Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor

Variants
152S	utility
152V	vineyard

Massey Ferguson 152S Engine
Perkins 2.5L 3-cyl diesel
Fuel tank	12.7 gal 48.1 L
Engine details ...

Massey Ferguson 152S Transmission
8-speed synchromesh
Transmission details ...

Massey Ferguson 152S Power
Engine	47 hp 35.0 kW
PTO (claimed)	44.7 hp (Max) 33.3 kW
	38.8 hp (540 RPM) 28.9 kW

Mechanical
Two-wheel drive
Manual steering
Wet disc brakes
Open operator station.

Hydraulics
Pressure	2500 psi 172.4 bar
Pump flow	4.4 gpm 16.7 lpm

Tractor hitch
Rear Type	II/I
Control	position and draft control
Rear lift (at ends)	4044 lbs 1834 kg

Power Take-off (PTO)
Rear PTO	live *Two-stage clutch.
Rear PTO Type	540 (1.375)
Engine RPM	540@1684

Dimensions & Tires
Wheelbase	75 inches 190 cm
Weight	3867 lbs 1754 kg
Front tire	6.00-16
Rear tire	11.2/10-28
Full dimensions and tires ...

References

152 S published in 1982, by Massey Ferguson

Engine

Engine Detail — 152.7 ci / 2.5 L Diesel

Manufacturer	Perkins AD3.152
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled
Displacement	152.7 ci 2.5 L
Bore/Stroke	3.60x5.00 inches 91 x 127 mm
Power	47 hp 35.0 kW
Fuel system	direct injection
Air cleaner	dual dry elements
Pre-heating	thermostart
Compression	16.5:1
Rated RPM	2250
Torque	125 lb-ft 169.5 Nm
Torque RPM	1400
Starter	electric
Starter volts	12
Oil capacity	7 qts 6.6 L
Coolant capacity	11.9 qts 11.3 L

Transmission

Transmission — 8 forward and 2 reverse synchromesh

Type	synchromesh
Gears	8 forward and 2 reverse
Oil capacity	41.2 qts 39.0 L
Four gears, plus reverse, with low and high range shift.

Dimensions

Massey Ferguson 152S Tires
Ag front	6.00-16
Ag rear	11.2/10-28

Dimensions
Wheelbase	75 inches 190 cm
Length	120 inches 304 cm
Width	49 inches 124 cm
Height (steering wheel)	54 inches 137 cm
Weight	3867 lbs 1754 kg
Front tread	44 to 67 inches 111 to 170 cm
Rear tread	40 to 60 inches 101 to 152 cm

Photos

Massey Ferguson 152S tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 152S based on its 47 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 152S.

Estimated Continuous Field Runtime: 5.2 hrs

Approximately 5.2 hours of continuous field operation at ~75% rated power on a full tank (12.7 gal / 48.1 L).

Estimated 75% Load Fuel Burn~2.4 gal/hr (9.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours